Could the default dry LINE surface be made more grippy please?
At the moment it acts like dirty road edge which is all well and good if dirty road edge is what you're after but in reality there are only 3 or 4 companies who produce the paint for FIM tracks and the grip levels of it are only a bawhair off those of the track itself.
Found this which may be of interest.
http://fim-latinamerica.com/w/wp-content/uploads/2016/04/004_CCR_New-FIM-approved-paint-for-starting-grid.pdf
I worked for years in the CAD corner of a road maintenance company and we were happy if SRTs were coming back in the 60s for road and low 50s for dry paint.
...so the average GP track has paint with higher grip than probably any road I've ever ridden.
...pretty please?
;D
The only solution i found is to make the withe lines from the road itself, it's a part of the road and not up 15 mm from the road, don't know how to well explain.
Quote from: janaucarre on October 09, 2017, 11:48:07 AM
The only solution i found is to make the withe lines from the road itself, it's a part of the road and not up 15 mm from the road, don't know how to well explain.
Like uv unwrap the track and color the white line on road itself ?
Yes
Thank you