PiBoSo Official Forum

GP Bikes => Mods => CAWS Mod Team => Topic started by: Napalm Nick on October 12, 2017, 10:42:14 PM

Title: CAWS MOD Team - Beta 12+ - Bike Release - Classic - MV Agusta Triple - BETA
Post by: Napalm Nick on October 12, 2017, 10:42:14 PM

On behalf of the CAWS MOD TEAM -

MV Agusta 500 Triple

(http://thumbsnap.com/i/AsMu2gh9.gif)
MV Agusta 500cc Triple WIKI LINK (https://en.wikipedia.org/wiki/MV_Agusta_500_Three)
https://www.youtube.com/v/ztr6IP9SqZY
THE MV AGUSTA 500 Three - Giacomo Agostini rode the 500 Three to seven consecutive 500cc World Championships Grand Prix motorcycle racing from 1966 to 1972. This is the Grand Prix version modified to 6 gears (from 7) to stay within the new evolving rules of the time

In the Official BikeMOD HERE (https://mega.nz/#F!GdAUhKxA!04IzRVoF6CEVLUq2nbpH1g) Friday 27th October 2017

Now Beta 12 holds the tyre files separately - Don't forget the TYRES and STANDS (will also be in the BikeMod).

All feedback is good.

Special appreciation to H106FRP for building this bike from SCRATCH - great 3d work and physics.


Points of Interest: No rev limiter: Be careful not to over-rev on the grid or in neutral or damage WILL occur suddenly
Gear for top speed at safe Revs.
Tyres initial temperature may be lower than optimum - do some laps before pushing.
Use SHIFT HELP for best results (no semi/ autoshifters on these) you can still do Manual when needed.
.

DELAYED
Title: Re: CAWS MOD Team - Beta 12+ - Bike Release - Classic - MV Agusta Triple - BETA
Post by: matty0l215 on March 29, 2020, 08:36:14 PM
Updated for b17 MV500 Triple
https://drive.google.com/file/d/1d7hiPWw7AaSUFB7rDulYRL7OhfCNn6Dt/view?usp=sharing (https://drive.google.com/file/d/1d7hiPWw7AaSUFB7rDulYRL7OhfCNn6Dt/view?usp=sharing)


Updated items;
New tyre textures and maps
Extensive update of  bike textures and maps
Updated physics, VR and tyre parameters
Updated suspension spring/damper/static sag values
Animated suspension
Animated cables in 1P and 3P
Front sprocket blurring
New 3P dash in the same style as the 1P

All support files are in the .zip and should be copied to the repective directories i.e. tyres, stand, third person dash
I fyou do not want to use the dash remove the line 'dash = MV500' from hud.cfg in the bike direcory
Paint templates and a .pnt are also zipped