• Welcome to PiBoSo Official Forum. Please login or sign up.
 

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Saemon No Jyo

1
Plugins / Re: MaxHUD plugin
August 19, 2023, 02:10:46 AM
Thank you very much. :)
2
Plugins / Re: MaxHUD plugin
February 07, 2022, 12:37:30 PM
Hello.
V2.2.6 Thank you.

The explanation has changed between the explanation given earlier in this thread and .pdf.

_tireslip_rumble_map0 = {0.03,1.00,0.03,1.00}
This will make the slip and vibration linear.

[min driving value, max driving value, min rumble strength, max
rumble strength]
Isn't it like this?

With the MaxHUD plugin, it's really fun to run.
I am always grateful for your help.  :)
3
Plugins / Re: MaxHUD plugin
February 04, 2022, 04:05:12 PM
Hello.

I really like 2.2.6 beta.

It tells me how much front wheel vibration can brake.
The vibration of the rear wheels makes the interaction between the rear wheels and the road surface fun.

I think it will be easier to understand if the vibration of the controller vibrates not only the motor of the grip part but also the trigger.
Is it impossible to vibrate the trigger without updating GP Bikes?

Hope for an update, let me choose how much to vibrate when pushing the bike back.

This is my setting.
I try to vibrate a little with a little slip and a big vibration with a big slip.
If two motors vibrate at the same time with four elements, it will be too lively, so I try not to make the total vibration too large.

[HUDRumble]
_ini_version=2
_enabled={1,1,1}
_pos_x={0.267708,0.267708,0.267708}
_pos_Y={0.619445,0.619445,0.619445}
_pos_linked=1
_optlinked=3967
_cogacc_rumble_profile0={0.30,15.00,0.01,0.50}
_cogacc_rumble_profile1={0.30,15.00,0.05,0.50}
_cogacc_rumble_profile2={0.30,15.00,0.10,0.50}
_tireslip_rumble_profile0={0.03,0.30,0.10,0.50}
_tireslip_rumble_profile1={0.06,1.00,0.01,1.00}
_tireslip_rumble_profile2={0.10,0.50,0.01,1.00}
show_widget={1,1,1}
xinput_device={0,0,0}
rumble_crashed={0,0,0}
rumble_cog_dest={1,1,1}
rumble_cog_map={1,1,1}
rumble_f_underrun_dest={2,2,2}
rumble_f_underrun_map={1,1,1}
rumble_r_underrun_dest={1,1,1}
rumble_r_underrun_map={2,2,2}
rumble_r_overrun_dest={2,2,2}
rumble_r_overrun_map={0,0,0}

I'm looking forward to the release of plugins like 2.2.6 beta for MXB beta 17.

Thank you for your wonderful work.  :)
4
Plugins / Re: MaxHUD plugin
December 20, 2021, 02:51:05 AM
Thank you very much.  :)
5
Plugins / Re: MaxHUD plugin
December 19, 2021, 05:33:53 PM
Hello.

MaxHUD_GPB64.dlo included with V2.2.5 is the same as v2.2.4b.
6
Plugins / Re: MaxHUD plugin
October 19, 2021, 07:42:05 AM
Quote from: HornetMaX on October 18, 2021, 08:12:18 PM
Quote from: Saemon No Jyo on October 18, 2021, 06:06:50 AM・ Please enable the screen display that was in v2.2.4 to be turned on and off. Because it is useful for setting.
In principle I'm against that, that's not info you have while riding (at least, not directly in numbers).
I'm pondering only having this in testing sessions (i.e. not in practice/quali/warmup/race etc.).
I should probably do that for other widgets too (e.g. HUDLean, for the same reasons).


Thank You for your reply. :D

The settings I wrote are not bike settings, but rumble settings.
I didn't have enough words. :'(

I set it while visually checking how much the rear wheel slipped and how much it vibrated.
It allows me to understand how much the rear wheels are slipping from the vibrations during riding.

It is interesting to feel the difference in the sliding of the rear wheels from the vibration, such as how to open the accelerator and change the bike setting.
7
Plugins / Re: MaxHUD plugin
October 18, 2021, 06:06:50 AM
Hello.

The new rumble is very nice.  :D
It's a lot of fun to run, knowing when and where the rear wheels will slip.

It's also useful on MX Bikes, where cornering that previously only passed is now more aggressive and sensual.

With the new rumble, GP Bikes and MX Bikes have reached a new level.


I have two requests.

・ Please enable the screen display that was in v2.2.4 to be turned on and off. Because it is useful for setting.

・ I want to know that the rear wheels are slipping due to the engine brake, so I want to set it so that it vibrates even in the negative direction.

This is my setting. I'm using an xbox one controller.
GP Bikes

MX Bikes

I'm sorry in strange English. Thank you for your wonderful work.  :)
8
Plugins / Re: MaxHUD plugin
December 27, 2020, 10:21:35 AM
Thank you very much.  :)
9
General Discussion / Re: GP Bikes beta19
December 26, 2020, 03:58:56 PM
Thank you PiBoSo.  :)
10
Plugins / Re: MaxHUD plugin
August 12, 2020, 04:26:42 AM
Thank you very much. :D
11
Plugins / Re: MaxHUD plugin
May 11, 2020, 04:11:19 AM
Thank you very much. :)
12
General Discussion / Re: GP Bikes beta16b
September 13, 2019, 07:21:25 AM
Thank you :)
13
Plugins / Re: MaxHUD plugin
September 13, 2019, 07:20:42 AM
Thank you :)
14
Bikes / Re: ReMAKE 250cc single racer
July 04, 2019, 12:51:01 PM
hi Yohji-san

I installed the downloaded files but the tyres do not appear.

If there is a tyre folder d_rr125_07 from MSM 125 RR 2007 in \ GP Bikes \ gpbikes \ tyres, tyres is displayed.

Rewrite one line of gfx.cfg file of the GP3-250 folder from "tyres = d_rr125_07" to "tyres = d_GP3", tyres is displayed even if d_rr125_07 is not placed in the tyres folder.
15
General Discussion / Re: GP Bikes beta15
February 07, 2019, 02:22:00 PM
Thank you very much.  :)