Messages

This video is not available...

How does one do that?

I have both SimXperience AccuForce and FANATEC ClubSport Pedals V3 listed in the Controller Drop Down Menu.

When I choose the SimXperience menu item it shows the wheel being moved but not the pedal input.

When I choose the FANATEC menu item is shows the pedals being actuated by not the wheel input.

I have both units plugged into my PC separately.

If I choose the Steer Input and move the wheel I see the Yellow Bars move left and right.

If I then choose the Throttle Input and press the throttle pedal I get nothing unless I calibrate the Fanatec first, then it shows up.

I seem to be having trouble getting the Wheel and Pedals to work together.

When I calibrate the Wheel and choose it as the steering device it works fine.

When I calibrate the Pedals and choose them in the various inputs they work fine.

They do not, however, work at the same time. I can have steering, or pedals, but not both.

Anyone have any ideas on how to get the two systems working together?

I have disabled the Pedals in SimCommander 4 so there is not any input going on there.

If you need additional testers for them there 125s let me know.

Will do, thanks.

I will test at Jerez this evening and see what kind of temperatures I get.

What is the recommended front tire temperature range. The front was above 90 degrees on the sides and 100 in the middle within a four or five laps. The rear was staying between 55 and 65 degrees. I was lapping in the 1:39 range at Cheste which qualifies as slug like so I was a bit surprised to see such high temps on the front. I did not mess with any suspension settings or tire pressures nor was I braking all that hard.

Very nice!

The interesting bit is at 35 seconds...

https://youtu.be/hmYHRNzunQI

Outstanding!

https://www.motorsport.com/wsbk/news/carrasco-becomes-bike-racing-first-female-world-champion/3186331/

Excellent work.

In reading through the XSimulator Plug In it looks as though the plug in captures chassis pitch and roll in degrees. Do you output suspension extension and compression?

Anyone up for some real fishing? Trolling is so unfair to the innocent inedible creatures being needlessly slaughtered by nets.

What i hate is that MM want to proof to the world that he is sorry about the move on VR (be sorry in my opinion mean he will no longer ride in such a way in future, not just sorry in front of the media) and not late than sunday, he did it again and Miller almost crashes with he's move  ..... but of course nobody noticed it because of "fenati" but also cause it seems that every body thinks it's normal nowaday that he ride like that ....

From what I saw Miller took a bit of an odd wide line and then tried to cut back to the inside. Unfortunately for him Marquez had already filled in the gap. Kind of reminded me of Miller's Moto3 days...

With regards to VR, his career spanning highlight reel includes many instances where he dove up the inside and either ran someone else off the track or crashed into them. He doesn't have a legitimate reason to complain about anyone else. Besides, at this point of the season he is irrelevant, unless, of course, he does something rash or continues to act like Trump.

i dont have any problems with the brakes.only off track grip is like riding motogp18. i use wssp600 and its awesome.

exactly. And this issue does not occur in case of original bikes made by Piboso...

The braking issue may not be present in PiBoSo's bikes, however, the front end of the 125s in B14 still wash out during corner exit.