Author Topic: profile.ini  (Read 6074 times)

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
profile.ini
« on: February 17, 2013, 05:09:43 PM »
There are a few settings that are only available manually editing profile.ini file that is located in profile directory under "profiles" in "My Documents"\PiBoSo\GP Bikes\ save path.

Code: [Select]
vsync=1
under "gfx" section to enable vertical sync.

Code: [Select]
map_shadow_disable = 1
under "gfx" section to disable track shadows.
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
Re: profile.ini
« Reply #1 on: February 17, 2013, 05:10:13 PM »
Code: [Select]
[testing]
groove_multiplier = 1
wet_multiplier = 1
1 is the default value. Increase it ( up to 20 ) to have the tires generate groove and dry the track faster. Please note that this affects tires only: the global track surface will still dry at the same ( slow ) rate.
Testing session only.
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
Re: profile.ini
« Reply #2 on: February 17, 2013, 05:10:47 PM »
Code: [Select]
[view]
shiftmul_lat = 1
shiftmul_vert = 1
shiftmul_long = 1
Decrease the values to reduce the effect of g-forces on the second cockpit view.
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
Re: profile.ini
« Reply #3 on: December 20, 2013, 11:27:08 AM »
Code: [Select]
[aids]
autobrake = 0

To disable the automatic brake ( proportional to track slope ) that is applied during the sighting lap and race starting procedure.
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
Re: profile.ini
« Reply #4 on: December 20, 2013, 12:07:29 PM »

Code: [Select]
[misc]
cockpit_info = 0

To disable cockpit info.
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
Re: profile.ini
« Reply #5 on: February 19, 2017, 11:02:38 PM »

Code: [Select]
[view]
mode = 1

To select the "alternative" mode for the onboard views ( pointing to the direction of motion and pitch relative to the ground rather than the bike ).
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2593
    • View Profile
Re: profile.ini
« Reply #6 on: February 19, 2017, 11:04:10 PM »

Code: [Select]
[aids]
riderfbleanlimit=1

If the automatic rider F/B lean is disabled, it limits the maximum forward lean with bike speed.
Obviously your ambition outweighs your talent

KG_03

  • Hero Member
  • *****
  • Posts: 739
    • View Profile
Re: profile.ini
« Reply #7 on: January 27, 2018, 05:55:07 PM »
PiBoSo I see that there is no more alternate onboard view in profile.ini , was it removed or I should add a text line mode = 1 in view section ?

Tosteetos

  • Full Member
  • ***
  • Posts: 116
    • View Profile
Re: profile.ini
« Reply #8 on: January 28, 2018, 04:03:41 PM »
I tried adding the line and it worked! Thanks KG! :)

KG_03

  • Hero Member
  • *****
  • Posts: 739
    • View Profile
Re: profile.ini
« Reply #9 on: January 28, 2018, 10:59:47 PM »
Cool, great info 👏