Author Topic: 250cc  (Read 2955 times)

Toomes1

  • Sr. Member
  • ****
  • Posts: 379
  • GP Team : Horizon GP#71
    • View Profile
250cc
« on: December 19, 2013, 07:08:38 PM »
I'm hoping that some clued up person here brings back the aprilia 250 thoughs were the days.

Alby46

  • Hero Member
  • *****
  • Posts: 963
    • View Profile
Re: 250cc
« Reply #1 on: December 19, 2013, 07:12:53 PM »
I'm making the torque curve right now :)
Still riding a 50cc, but enjoying it :)

Toomes1

  • Sr. Member
  • ****
  • Posts: 379
  • GP Team : Horizon GP#71
    • View Profile
Re: 250cc
« Reply #2 on: December 19, 2013, 07:17:33 PM »
I'm making the torque curve right now :)
Thanks Alby46, happy days.

cjmc78

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: 250cc
« Reply #3 on: December 19, 2013, 07:59:24 PM »
I just doubled the torque figures on the msm 125 rr to test it. Its quite realistic because a 250 engine is basically two 125s. The problem with the bike is that it rides like the clutch is slipping on full throttle. Not sure how to fix that. Any ideas?

Here's the engine file:
https://mega.co.nz/#!ZdgQ2AwD!Zxn-iCWmYOxxpnXLg5m6rTPREPQCDCAXHpuW5rPf57o
« Last Edit: December 19, 2013, 08:03:41 PM by cjmc78 »

HornetMaX

  • Hero Member
  • *****
  • Posts: 5905
    • View Profile
Re: 250cc
« Reply #4 on: December 19, 2013, 08:09:27 PM »
I just doubled the torque figures on the msm 125 rr to test it. Its quite realistic because a 250 engine is basically two 125s. The problem with the bike is that it rides like the clutch is slipping on full throttle. Not sure how to fix that. Any ideas?
There's a "Clutch" section in the engine file ...

But I'd say that without a proper understanding of all the parameters it will be hard to do something good. It's like shooting in the dark ...

MaX.

oppolo

  • Full Member
  • ***
  • Posts: 153
    • View Profile
Re: 250cc
« Reply #5 on: December 19, 2013, 08:11:03 PM »
- Its quite realistic because a 250 engine is basically two 125s.

- The problem with the bike is that it rides like the clutch is slipping on full throttle. Not sure how to fix that. Any ideas?


- uhmm

- it's in the cfg

Clutch
   {
      MaxTorque = 490
      Mapping = 2
      DeadZone = 0.04
      Slipper = 1
      RampAngle
      {
         range = 30, 5, 45
         setting = 1
      }
      MaxSlip
      {
         range = 0.5, 0.1, 1.0
         setting = 2

cjmc78

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: 250cc
« Reply #6 on: December 19, 2013, 08:13:25 PM »
Cool. Thanks. I'll try that now.

cjmc78

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: 250cc
« Reply #7 on: December 19, 2013, 08:25:50 PM »
Ok that works. I just doubled the "MaxTorque" setting. No more slipping. Thanks.

BozoCRO

  • Full Member
  • ***
  • Posts: 190
    • View Profile
Re: 250cc
« Reply #8 on: December 19, 2013, 09:31:45 PM »
Great job guys, looking forward to take it for a spin!!!!  8)