Thumbstick extensions

[h106frp]

Gave these a go and its a definite improvement on the short standard stick for direction control.


Designed for xbox so needed to take a tiny bit of material off the bottom to make them compatible with the GPX pad where they snagged on the elevated bit of the housing. Only a few quid and worth a try

[Blackheart]

I use these:

[HornetMaX]

Same here, I started using these a long time ago (with or without the "thumb holder"): http://www.kontrolfreek.com/thumbsticks/speed-freek-apex.html

[Toomes1]

Same here, I started using these a long time ago (with or without the "thumb holder"): http://www.kontrolfreek.com/thumbsticks/speed-freek-apex.html

I'm gonna have to order some of these... Very interesting.

[doubledragoncc]

I could design and print this kind of thing real cheap

DD

[Napalm Nick]

Do it DD! £1 a pack and you be rich by Christmas. Consider this a pre-order. 

[doubledragoncc]

Will help if guys say what they want.........................

Do they want them longer etc etc

Will be a bit of testing needed lol

Not that much you can do really but if it helps you guys I am up for it


DD

[Toomes1]

Ready to order a set DD, when can you start.

[doubledragoncc]

I am out most of the day but will get some designing in for the new GSXR1000 Rear Sets unit and these little buggers too

DD

EDIT: I only have a XEON gamepad and need the different diameter across the thumbsticks pad area for the different types of gamepads???

Need your help to be able to do it guys please

[Blackheart]

I'm looking for a mod for my old gpx, i need move the left stick just to right and left, and not up and down, it would be easier to correct lean angle 

[h106frp]

Will help if guys say what they want.........................

Do they want them longer etc etc

Will be a bit of testing needed lol

Not that much you can do really but if it helps you guys I am up for it


DD

You could probably go to 3/4'' elevation without them being uncomfortable - the commercial ones give about 1/2'', anybody else using them fell they would want them a bit longer if possible?

[doubledragoncc]

Thats what I think too H

I need thumbstick diameters for all the standard types of controller as some seen bigger. I have 2 sizes stock XEON and an old 360 pad I think but really need them all lol

DD

[h106frp]

GPX is 18mmm dia x 3 thick at the rim and the face is concave

[Toomes1]

GPX is 18mmm dia x 3 thick at the rim and the face is concave

Thanks mate,there you go DD I also have the gpx gamepad.

[doubledragoncc]

Thanks I think I need to figure how to make it fit 18 to 19 and be tight plus not crack like the ones in the first post.

DD