Turbo!

[Manu]

Possibility of adding a turbo

https://www.youtube.com/v/AwwHMshSMyc

[grimm]

Technically the H2 has a supercharger (driven off engine speed), and a turbocharger (like my bike) is driven by exhaust gas. I'm personally unsure how the engine files would handle a turbocharger, maybe a secondary file that has the boost mapping? Or a section of the config file that determines the boost level versus rpm, throttle position, etc.?

The biggest question I have is weather the RX car on WRS has the key to how to implement it into GP Bikes.



Little rev before the floats were adjusted to suit the tune. 9000rpm with the gate set at 1 bar (14psi), came into boost with demonic anger. Upping boost to 1.6-1.8 bar (24-26psi) next summer... 
https://www.youtube.com/watch?v=n9MHm39-_7E

[HornetMaX]

Nice work on the dash Manu! I hope Gpbikes allows you to put the turbo whistle in as well, would add a lot to the authenticity i guess

It shouldn't be too hard I think, it's just rpm driven.

But technically it's not a turbo, just a supercharger

No need for a second file, just additional samples in the throttle ON layer. Putting nothing for the turbo in the OFF layer will make the turbo sound intensity vary with throttle position: it's probably not technically perfect, but should be enough.