Author Topic: CAWS MOD Team - Beta 12+ - Bike Release - 2012 SSP600 Set - BETA  (Read 7501 times)

KG_03

  • Hero Member
  • *****
  • Posts: 682
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #105 on: October 09, 2017, 02:13:38 PM »
It happens to every bike as I have noticed...but to be 100% sure I will test it again in the evening and make proper video documentation 😊 thanks! 😊

KG_03

  • Hero Member
  • *****
  • Posts: 682
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #106 on: October 14, 2017, 05:40:18 PM »
Sorry for asking, but I have looked into Daytona CFG file and it has everywhere the same numbers in second row for front and rear suspension... was it made on purpouse or its just a code that was in original file some time ago?
« Last Edit: October 14, 2017, 05:46:10 PM by KG13 »

Napalm Nick

  • Moderator
  • Hero Member
  • *****
  • Posts: 4684
  • #68 NICKED-IT RACING - STEAL THE FINISH LINE
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #107 on: October 14, 2017, 08:00:54 PM »
Looking into it mate  :o

Napalm Nick

  • Moderator
  • Hero Member
  • *****
  • Posts: 4684
  • #68 NICKED-IT RACING - STEAL THE FINISH LINE
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #108 on: October 14, 2017, 09:19:44 PM »
Yes, base settings inherited when we took the bikes over.

Adalgood

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #109 on: October 15, 2017, 11:07:49 AM »
Hi Guys, I have a curiosity. Can you tell me what is the optimal temperature of the tires in this Mod?

matty0l215

  • Moderator
  • Hero Member
  • *****
  • Posts: 3535
  • CAWS Racing #61
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #110 on: October 15, 2017, 11:20:01 AM »
75-100 degrees depending on the tyre... :P

as a rule-

Hards around the 100's
Softs in the high 80's
Qualiy should be in the low 80's
Wet shoud be below 80, mid 70's best.

Please bare in mind these sorts of values are liable to change as we develop the bikes.

Adalgood

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #111 on: October 15, 2017, 03:29:37 PM »
Thanks matty. I can not work the soft tires above 70 degrees :-\

matty0l215

  • Moderator
  • Hero Member
  • *****
  • Posts: 3535
  • CAWS Racing #61
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #112 on: October 15, 2017, 03:35:29 PM »
They are optimal at 75 degrees with a rough 10 degrees above or below so 65-85 degrees optimal

Napalm Nick

  • Moderator
  • Hero Member
  • *****
  • Posts: 4684
  • #68 NICKED-IT RACING - STEAL THE FINISH LINE
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #113 on: October 15, 2017, 04:24:25 PM »
And don't forget the tyre temperature you can make will depend on the track and air temperature set by the server. Also the track layout itself.

KG_03

  • Hero Member
  • *****
  • Posts: 682
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #114 on: October 15, 2017, 04:58:53 PM »
Yes, base settings inherited when we took the bikes over.

Ah thank you for looking into it :-)

KliPPiE

  • Full Member
  • ***
  • Posts: 201
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #115 on: October 21, 2017, 07:34:37 AM »
Stupid question:

How do you check tyre temprature, im using maxhud but do i need something different

regards
Kind Regards
KliPPiE

Napalm Nick

  • Moderator
  • Hero Member
  • *****
  • Posts: 4684
  • #68 NICKED-IT RACING - STEAL THE FINISH LINE
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #116 on: October 21, 2017, 08:36:05 AM »
2 ways
1. Go to track and do laps then return to pit and check temperatures when u want the info.

2. Enter debug mode to see the temperatures in real time while riding offline only.
To enable debug mode, edit the file gpbikes.ini ( located in the gpbikes folder in the GP Bikes installation folder ) and add:
Code: [Select]
[debug]
physics = 1

When it is activated, it is possible to enter "sag check mode" using the keys 1 and 2 to remove and add the rider.

KliPPiE

  • Full Member
  • ***
  • Posts: 201
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #117 on: November 02, 2017, 05:47:37 PM »
2 ways
1. Go to track and do laps then return to pit and check temperatures when u want the info.

2. Enter debug mode to see the temperatures in real time while riding offline only.
To enable debug mode, edit the file gpbikes.ini ( located in the gpbikes folder in the GP Bikes installation folder ) and add:
Code: [Select]
[debug]
physics = 1

Im so dumb where in the pit does it say tyre temperature

When it is activated, it is possible to enter "sag check mode" using the keys 1 and 2 to remove and add the rider.
Kind Regards
KliPPiE

KliPPiE

  • Full Member
  • ***
  • Posts: 201
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #118 on: November 02, 2017, 05:54:37 PM »
Caws please i beg

Please balance the bikes slipper clutches the gsxr600 is op at the moment with its slipper clutch but the zx6 which is better in real life is horse shit like balance all the bikes according to how they go about in real like the triumph is hard to ride in real life as it slides in with the torque like heavily and the zx r6 and gixxer are smooth to ride the ducati should also be rough with its torque ...
Kind Regards
KliPPiE

Napalm Nick

  • Moderator
  • Hero Member
  • *****
  • Posts: 4684
  • #68 NICKED-IT RACING - STEAL THE FINISH LINE
    • View Profile
Re: CAWS MOD Team - Beta 12 - Bike Release - SSP600 Set - BETA
« Reply #119 on: November 02, 2017, 10:20:05 PM »
You know these bikes are from 2012 ?  :) 


Im so dumb where in the pit does it say tyre temperature


See pic:
1 = The Left side, Middle and Right Side of the tyre for Front Tyre with wear indicator (shaded area) and pressure below.
2 = The same but for the rear tyre
3 = Selects what tyre is shown below it- check it is the same as the tyre you are using.

Hope that helps.