### Author Topic: Help making a track  (Read 441 times)

#### JOACKO172

• Full Member
• Posts: 141
##### Help making a track
« on: March 06, 2018, 06:01:04 PM »
I am making a track and i got a message when i enter to the track and it says "complete pitlane"? What i need to do?

#### MultiCOOLFRESH

• Hero Member
• Posts: 539
• Burrn rubber, not your soul
##### Re: Help making a track
« Reply #1 on: March 06, 2018, 06:16:46 PM »
Sadly I can not help, but nice to see you making a track Keep up the good work my man

MCF
Heeeeeey Hoooooo

GP Bikes Discord Server (https://discord.gg/CKqrHHF)

#### JOACKO172

• Full Member
• Posts: 141
##### Re: Help making a track
« Reply #2 on: March 06, 2018, 06:22:27 PM »
Thanks m8!

#### janaucarre

• Global Moderator
• Hero Member
• Posts: 985
##### Re: Help making a track
« Reply #3 on: March 06, 2018, 09:15:36 PM »
Hi,
Centerline not closed
Centerline not begin with a straight and finished with a curve
Pit place / stand not on the asphalt
No start/finish line
No speed trap line
No point for time => 3 lines along the track
The three line mensioned up not right drawed=> left MUST BE in negative(-) right must be in positive (+)

#### JOACKO172

• Full Member
• Posts: 141
##### Re: Help making a track
« Reply #4 on: March 06, 2018, 09:18:02 PM »
Thanks, i Will try

#### Steven

• Jr. Member
• Posts: 76
##### Re: Help making a track
« Reply #5 on: March 08, 2018, 01:52:32 AM »
The track looks very small compared to the start/finish line and the grid positions for example. Is the scale right? For comparision: x and z in the bottom right corner is in meters.

#### JOACKO172

• Full Member
• Posts: 141
##### Re: Help making a track
« Reply #6 on: March 08, 2018, 01:56:12 AM »
I tried everything janaucarre said and it still not working. I think is a problem with the scale of the track, thanks for the advice.

#### h106frp

• Hero Member
• Posts: 1786
##### Re: Help making a track
« Reply #7 on: March 08, 2018, 08:46:02 AM »
Your track is indicating 121m long, when you first add a track CL segment it is 10m long for comparison with your track width.

In Max you have to check the scale you are working in cm. If using fbx2edf just export at a bigger scale *10 or *100

#### janaucarre

• Global Moderator
• Hero Member
• Posts: 985
##### Re: Help making a track
« Reply #8 on: March 08, 2018, 09:33:36 AM »
Hi,
It happened to me this scale forget, haha.
Make the centerline as well as possible, in the middle everywhere, close it, look its length and change in 3ds by using scale, i didn't remember well where it is by think, but there is two different manner to rescale in 3ds and one is bad other is good.
If your centerline must be for example 1600m and now is 121, 1600/121=13,223, in 3ds you must use % => 13.223*100=1322.3% for rescale.
After that, reexport, rescale the centerline, there is an option in tracked exactly same as in 3ds => 1322.3%, look at the size and correct one more time or two if it is needed in 3ds.

#### JOACKO172

• Full Member
• Posts: 141
##### Re: Help making a track
« Reply #9 on: March 08, 2018, 06:33:56 PM »
Hi guys. Here I am again. I tried everithing. i change the scale of the track. i made the race data from scratch and still having the same text when loading the track "complete pitlane"

#### Grooveski

• Sr. Member
• Posts: 469
##### Re: Help making a track
« Reply #10 on: March 08, 2018, 06:42:36 PM »
Have you assigned PITIN and PITOUT surfaces?

#### JOACKO172

• Full Member
• Posts: 141
##### Re: Help making a track
« Reply #11 on: March 08, 2018, 06:44:07 PM »
Nope, that is the problem?

#### Grooveski

• Sr. Member
• Posts: 469
##### Re: Help making a track
« Reply #12 on: March 08, 2018, 06:47:32 PM »
Beats me.  Gotta be worth a try though.

I think you need them for the pitlane speed display/limits to work anyway.

#### h106frp

• Hero Member
• Posts: 1786
##### Re: Help making a track
« Reply #13 on: March 08, 2018, 07:08:03 PM »
Can you post the .trp and the centreline?

• Full Member
• Posts: 141