Author Topic: GP Bikes beta15  (Read 2227 times)

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2755
    • View Profile
GP Bikes beta15
« on: February 06, 2019, 04:59:22 PM »

GP Bikes beta15 available:
http://www.gp-bikes.com/?page=news

Download:
http://www.gp-bikes.com/?page=downloads
( download mirrors would be extremely helpful and welcome )
Obviously your ambition outweighs your talent

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2755
    • View Profile
Re: GP Bikes beta15
« Reply #1 on: February 06, 2019, 05:00:06 PM »
Release Notes
- a clean installation is strongly recommended
- since GP Bikes is a 64 bit only application the default installation folder has been changed to "Program Files"
- replays are not compatible with the previous versions
- the mods folder setting has been moved to the file "gpbikes.ini": http://forum.piboso.com/index.php?topic=14.msg95654

- please note that this is only the first release of the new bike. Please leave your feedback so it can be improved in future updates.


Modding
- due to the changes to the gearbox simulation, the parameter "DisengageMaxTorque" ( under the "gearbox" section of the bike CFG file ) should be tuned. Multiplying it by two should be a good starting point
- electric bikes should be converted to be properly simulated: http://forum.piboso.com/index.php?topic=6456
- the chain animation has been changed: http://forum.piboso.com/index.php?topic=6464
- the revised physics debug mode now shows the clutch state after the slipper clutch calculation, too ( the rightmost blue bar ): http://forum.piboso.com/index.php?topic=3767
- for an example of how the track timer and standings work, please check the MX Bikes example track: http://www.mx-bikes.com/downloads/mxb_track_example.zip
- the maximum number of engine sound samples per layer has been increased from 10 to 20
- the proxy UDP plugin has been updated: http://forum.piboso.com/index.php?topic=6063
« Last Edit: February 11, 2019, 01:13:41 PM by PiBoSo »
Obviously your ambition outweighs your talent

speedfr

  • Sr. Member
  • ****
  • Posts: 376
    • View Profile
Re: GP Bikes beta15
« Reply #2 on: February 06, 2019, 05:32:18 PM »
Thank you for the hard work.
Will give it a try asap.

Great news Piboso !  ;)
« Last Edit: February 06, 2019, 05:34:18 PM by speedfr »
"An error may become true depending on whether the person who made it was wrong or not." P.DAC.


Missing Gp500 (Microprose)

Testing EDTracker Pro on YT

i7-4790K/16Go/GTX1070/1440p/Full WC

doubledragoncc

  • Hero Member
  • *****
  • Posts: 4665
  • If it dont fit HIT it!!!!!!!!!
    • View Profile
    • GPBOC Live Streams
Re: GP Bikes beta15
« Reply #3 on: February 06, 2019, 06:11:35 PM »
OK...........Mods work but bikes have shifting problems unless the "DisengageMaxTorque" is doubled as Piboso said before but just doubling the figure is not perfect at all it must be figured by the Modders to get right, so you can ride the bikes but not have perfect shifting, I have only tried 3 bikes so far. I have a major issue though and that is the steering is now acting like a milestone game and no matter what settings there is a massive deadzone???

I do still have beta14 on my system and let GPB install in Programe Files as Pib wants it to but I think it is cxausing a conflict. Also every time I make any adjustment in settings it blacks the screen and ask to keep the resolution?

As a surgetion to the modders. Instead of us having to download anything to get mod bikes working right, can you not have a forum thread dedicated to letting us know what to alter on what bike ie the correct figure for the DisengageMaxTorque?
I know you dont want people playing with your bikes but if all kept the same number then there wouuld be no missmatch or a complicated folder could be made to over write the cfg files for all the bikes lol

DD

« Last Edit: February 06, 2019, 06:53:14 PM by doubledragoncc »
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls

Teamspeak: Server IP: 82.43.148.211  user password "yougetin"

i5 7600 5.0GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix GTX1050Ti OC 4GB DDR5 Kraken X62 AIO Cooler

Davide74

  • Hero Member
  • *****
  • Posts: 824
  • Siempre a gas!!
    • View Profile
Re: GP Bikes beta15
« Reply #4 on: February 06, 2019, 06:57:18 PM »
The first impression of the moto2 is good, I like the difficulty to enter the curve and movements.

The bad news is that my two favorite mods (250 2T and STK 1000) I lost all his essence ..

sorry for my bad english

DidietXFuera

  • Full Member
  • ***
  • Posts: 207
    • View Profile
    • My YouTube
Re: GP Bikes beta15
« Reply #5 on: February 07, 2019, 04:02:29 AM »
- please note that this is only the first release of the new bike. Please leave your feedback so it can be improved in future updates.
Thank you in advance for your hard work, PiBoSo. I really like this beta 15. One of the things I like is the bug that has been fixed on the front suspension when hard braking. You have done a good job.

After trying Moto2, it has a different physic than the previous official bike. Unfortunately, I felt it was difficult to control the bike when it was in the corner and resulting a front-end. I feel that the front tire has no grip on the asphalt. Maybe I just need more adaptation. lol.

But overall, my waiting was finally worth it. Great job.  8)
« Last Edit: February 07, 2019, 04:08:17 AM by DidietXFuera »
GP-Bikes INDONESIA
Like GP-Bikes Indonesia Facebook: https://www.facebook.com/gpbindo/

gareng

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: GP Bikes beta15
« Reply #6 on: February 07, 2019, 07:48:12 AM »
About time, thanks piboso

Myst1cPrun3

  • Full Member
  • ***
  • Posts: 197
    • View Profile
Re: GP Bikes beta15
« Reply #7 on: February 07, 2019, 07:54:09 AM »
Can't wait to try this later  :)
"Don't lift until the thrill of speed is overcome by the fear of death" - Unknown

doubledragoncc

  • Hero Member
  • *****
  • Posts: 4665
  • If it dont fit HIT it!!!!!!!!!
    • View Profile
    • GPBOC Live Streams
Re: GP Bikes beta15
« Reply #8 on: February 07, 2019, 10:23:20 AM »
What bike make and model did you actually base this on.....I mean motor and chassis

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls

Teamspeak: Server IP: 82.43.148.211  user password "yougetin"

i5 7600 5.0GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix GTX1050Ti OC 4GB DDR5 Kraken X62 AIO Cooler

Alex Nogueira

  • Newbie
  • *
  • Posts: 40
    • View Profile
Re: GP Bikes beta15
« Reply #9 on: February 07, 2019, 11:20:21 AM »
- please note that this is only the first release of the new bike. Please leave your feedback so it can be improved in future updates.
Thank you in advance for your hard work, PiBoSo. I really like this beta 15. One of the things I like is the bug that has been fixed on the front suspension when hard braking. You have done a good job.

After trying Moto2, it has a different physic than the previous official bike. Unfortunately, I felt it was difficult to control the bike when it was in the corner and resulting a front-end. I feel that the front tire has no grip on the asphalt. Maybe I just need more adaptation. lol.

But overall, my waiting was finally worth it. Great job.  8)


I share the same opinion of DidietXFuera, I also felt it was difficult to control the bike when I was in the corner and resulting in a front end. I feel that the front tire has no grip on the asphalt. lose adhesion easily, especially using soft tires; with that it should have a lot more grip. I also really liked the bike and the engine chassis. and thank you for the outstanding work.



matty0l215

  • Hero Member
  • *****
  • Posts: 3483
  • CAWS Racing #61
    • View Profile
Re: GP Bikes beta15
« Reply #10 on: February 07, 2019, 11:24:44 AM »
What bike make and model did you actually base this on.....I mean motor and chassis

DD

Kalex isnt it??

Yohji

  • Full Member
  • ***
  • Posts: 213
  • GP Bikes Japan -akaitori-
    • View Profile
    • Japan GP Bikes -akaitori-
Re: GP Bikes beta15
« Reply #11 on: February 07, 2019, 02:19:46 PM »
thx piboso! for Update!

M2Bike has nice cornering potential.

do you planning adjusting slipper clutch in garage?

and I want to checking air pressure, realtime Eg Torque parameter and chassis flexing in debug mode.

thank you.

Saemon No Jyo

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: GP Bikes beta15
« Reply #12 on: February 07, 2019, 02:22:00 PM »
Thank you very much.  :)

doubledragoncc

  • Hero Member
  • *****
  • Posts: 4665
  • If it dont fit HIT it!!!!!!!!!
    • View Profile
    • GPBOC Live Streams
Re: GP Bikes beta15
« Reply #13 on: February 07, 2019, 04:24:24 PM »
Yeah Matty is what I think with Honda motor but wanted to be sure for doing my paints

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls

Teamspeak: Server IP: 82.43.148.211  user password "yougetin"

i5 7600 5.0GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix GTX1050Ti OC 4GB DDR5 Kraken X62 AIO Cooler

matty0l215

  • Hero Member
  • *****
  • Posts: 3483
  • CAWS Racing #61
    • View Profile
Re: GP Bikes beta15
« Reply #14 on: February 07, 2019, 06:14:03 PM »
Yeah Matty is what I think with Honda motor but wanted to be sure for doing my paints

DD

Well technically it is the Honda CBR 600 Lump but I don't think teams advertised that.