Author Topic: profile.ini  (Read 2928 times)

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
profile.ini
« on: December 22, 2012, 07:46:40 PM »
There are a few settings that are only available manually editing profile.ini file that is located in profile directory under "profiles" in "My Documents"\PiBoSo\World Racing Series\ save path.

Code: [Select]
vsync=1
under "gfx" section to enable vertical sync.

Code: [Select]
map_shadow_disable = 1
under "gfx" section to disable track shadows.
« Last Edit: February 17, 2013, 05:31:59 PM by PiBoSo »

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
Re: profile.ini
« Reply #1 on: December 22, 2012, 07:52:52 PM »
Code: [Select]
[testing]
groove_multiplier = 1
wet_multiplier = 1
1 is the default value. Increase it ( up to 20 ) to have the tires generate groove and dry the track faster. Please note that this affects tires only: the global track surface will still dry at the same ( slow ) rate.
Testing session only.

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
Re: profile.ini
« Reply #2 on: December 22, 2012, 07:53:41 PM »
Code: [Select]
steeringwheelleds = 1
steeringwheelleds_range = 1200
under "input" section to enable Logitech G27 leds.

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
Re: profile.ini
« Reply #3 on: December 22, 2012, 07:54:14 PM »
Code: [Select]
[view]
shiftmul_lat = 1
shiftmul_vert = 1
shiftmul_long = 1
pitchmul = 1
Decrease the values to reduce the effect of g-forces on the cockpit view.

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
Re: profile.ini
« Reply #4 on: December 16, 2013, 09:07:22 PM »

Code: [Select]
[aids]
autobrake = 0

To disable the automatic brake ( proportional to track slope ) that is applied during the sighting lap and race starting procedure.

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
Re: profile.ini
« Reply #5 on: December 20, 2013, 12:06:14 PM »

Code: [Select]
[misc]
cockpit_info = 0

To disable cockpit info.

PiBoSo

  • Administrator
  • Hero Member
  • *****
  • Posts: 2200
    • View Profile
Re: profile.ini
« Reply #6 on: May 26, 2015, 12:36:16 PM »
Code: [Select]
[testing]
deformation_multiplier = 1
1 is the default value. Increase it ( up to 20 ) to have the tires deform the terrain faster.
Testing session only.