[BIKE] Yamaha YZR-M1

[Klax75]

Great work! One thing I did notice, the RMP/Shift lights are a very faint white. I didn't even realize they were doing anything for a while. Maybe make them green/orange/red? Make them more noticable.

[RiccoChicco]

An update will be out tomorrow with following fixes :

- Reworked chain
- Skinnable wheels
- Cockpit LEDs redone

If someone want me to correct something else feel free to ask 

[Klax75]

Great work dude! I really love this bike. and I was just about to post for the wheel rim texture. lol

[valentinik46]

this one was needed,at last m1 as it should be,are the sounds new ,they are amazing.thanks its beautyfull

[Klax75]

Would it be possible to add the water temp back on the dash?

[C21]

Thank you very mucj guys!
Much appriciated!
I was eagerly waiting for an update of the M1.....and there you are.
It is time to create different physics for each of the MGP bikes 

[RiccoChicco]

Would it be possible to add the water temp back on the dash?

Why not, but I don't see much space left on the dash 

[RiccoChicco]

Update on first post :

- RPM LEDs redone (you should see it clearly now  )
- Fixed a graphic problem with chain
- Skinnable wheels (Thanks Tchoum)

Wheels template added to the templates pack 

Hope you like it! 

[Stout Johnson]

Thumbs up frome me! Thank you guys. Especially for the shift lights.

[Alone]

Beautyfull bike! Thanks guys

[Klax75]

I can't stop using this bike! Thanks for the update.

I did notice something, the LED's are hitting red really fast when your not at the end of the gear. If you put MaxHUD on and have speed showing his will turn red much later. On the bike the LED's are hitting red very quickly so you shift, when you're not actually at the end of the gear yet.

[rodney007]

Very enjoyable, great mod thank you!

[tonygas]

thank you very much for the mod, this great

[GhostdogNL]

nice work man

[C21]

I did notice something, the LED's are hitting red really fast when your not at the end of the gear. If you put MaxHUD on and have speed showing his will turn red much later. On the bike the LED's are hitting red very quickly so you shift, when you're not actually at the end of the gear yet.

@Klax and Ricco
This is because you only have 8 LED (4 green/2 orange/2 red) in the dash but the min rpm of the rpm_light is set to 6000 and the step to 1000rpm.
This results in:
1st LED: 6000
8th LED: 13000 rpm

You can either:
a) change the min rpm to 9000
1st: 9000
8th: 16000
or
b) change the step to 1500rpm and set min rpm to 6000.
1st: 6000
8th: 16500 (you will only see the 8th LED when rpm is above 16500 at downshift)
or
c) if you prefer a "full" powerband displayed in the LED´s:
change step to 2000rpm and min to 2000rpm
1st: 2000
8th: 16000

I suggest that Ricco will check which version he prefers and update the M1 file again   
Values can be found in gfx.cfg / rpm_lights