PiBoSo Official Forum

GP Bikes => Mods => Bikes => Topic started by: JamoZ on December 23, 2013, 10:25:10 PM

Title: R6 Screamer Update
Post by: JamoZ on December 23, 2013, 10:25:10 PM
Warlock released his new sound update for the R6 which sound amazing!

backup your original sounds if needed and just drag and drop the new ones in the Yamaha R6 folder :

JamoZ V1.1 : https://mega.co.nz/#!SwxX1RQR!Z6ZV8wxR789ySm_v3K7rxmW0DvVuwc5IO5GiDIfV4eI (https://mega.co.nz/#!SwxX1RQR!Z6ZV8wxR789ySm_v3K7rxmW0DvVuwc5IO5GiDIfV4eI)

Warlock V1.1 Screamer : https://mega.co.nz/#!S4gQFQxD!Jnb-CiQFdSbFhf1dF0nYiFWvbNMqCC9pgqFwX2tV7Vw (https://mega.co.nz/#!S4gQFQxD!Jnb-CiQFdSbFhf1dF0nYiFWvbNMqCC9pgqFwX2tV7Vw)

Title: Re: R6 Sound Mod
Post by: ludo05 on December 23, 2013, 10:29:09 PM
ty mate  ;)
Title: Re: R6 Sound Mod
Post by: Abigor on December 23, 2013, 10:43:01 PM
Much better now for me ......its sound more aggressive....i like it......i like it  ;D
Title: Re: R6 Sound Mod
Post by: neoraptor on December 23, 2013, 11:35:43 PM
Thank you !
It indeed sounds better !!

I will integrate them in the next default version (if you see no problem).
Title: Re: R6 Sound Mod
Post by: JamoZ on December 24, 2013, 12:06:18 AM
Sure, go ahead. But me and warlock are working on improving this sound so you might want to wait a little bit longer ;)
Title: Re: R6 Sound Mod
Post by: neoraptor on December 24, 2013, 12:15:45 AM
No problem ;)
Do you know how much time you will need?

I plan to add an engine map for stock motor (about 120ps) and make some changes on the model/skin side also.
So I will be ready in a few days.
Title: Re: R6 Sound Mod
Post by: JamoZ on December 24, 2013, 12:26:07 AM
Not very long, i think 1 or 2 days...
Title: Re: R6 Sound Mod
Post by: Alone on December 24, 2013, 01:11:24 AM
Great JamoZ!! Thx!
Title: Re: *update* R6 Sound Mod 1.1
Post by: JamoZ on December 25, 2013, 02:43:45 PM
Updated :)
Title: Re: *update* R6 Sound Mod 1.1
Post by: ludo05 on December 25, 2013, 03:21:10 PM
dling it !
Title: Re: R6 Sound Mods
Post by: JamoZ on December 25, 2013, 06:33:25 PM
Warlock`s sounds added :)
Title: Re: R6 Sound Mods
Post by: PeterV on December 25, 2013, 08:07:49 PM
good sounds guys, nice work
Title: Re: R6 Sound Mods
Post by: Warlock on December 25, 2013, 10:39:15 PM
Thx Jamoz, hope you guys like it  :)
Title: Re: R6 Sound Mods
Post by: neoraptor on December 26, 2013, 01:54:53 AM
Thanks a lot for your work guys !!
I tried both version, and I like the one of Warlock a bit better because you hear the rev more precisely.

I included your sounds in the last version of the R6 (http://forum.piboso.com/index.php?topic=359.msg2321#new) ;)
Title: Re: R6 Sound Mods
Post by: Warlock on December 26, 2013, 02:03:16 AM
Cool  !   thx m8  ;)
Title: Re: R6 Sound Mods
Post by: SwarleyRuiz on December 26, 2013, 07:31:35 AM
thanks JamoZ
Title: Re: R6 Sound Screamer Update
Post by: JamoZ on January 01, 2014, 03:26:54 AM
first post updated :D
Title: Re: R6 Screamer Update
Post by: Stout Johnson on January 01, 2014, 05:06:28 AM
very nice sounds now!!!
Title: Re: R6 Screamer Update
Post by: Abigor on January 01, 2014, 11:27:41 AM
Waaw!!! this is amazing sound  :P
Title: Re: R6 Screamer Update
Post by: neoraptor on January 01, 2014, 12:15:14 PM
Very nice !! It sounds much closer to an r6 now !!
Title: Re: R6 Screamer Update
Post by: Hawk on January 01, 2014, 12:44:48 PM
Quote from: JamoZ on December 23, 2013, 10:25:10 PM

JamoZ V1.1 : https://mega.co.nz/#!KgxQWbAB!AEuTXlotaVQUZ9t5nFInmxiNmOQWBsyvUfYfPsTJtZQ


Hi JamoZ.

The above link is showing as, "The file you are trying to download is no longer available".

Just thought I'd let you know, mate. ;)
Title: Re: R6 Screamer Update
Post by: JamoZ on January 01, 2014, 01:39:12 PM
Thanks hawk, fixed!
Title: Re: R6 Screamer Update
Post by: Harrytmj66 on January 02, 2014, 10:03:07 PM
Quote from: JamoZ on January 01, 2014, 01:39:12 PM
Thanks hawk, fixed!

Its saying it has been removed again mate  :(
Title: Re: R6 Screamer Update
Post by: Harrytmj66 on January 02, 2014, 10:04:30 PM
Quote from: Harrytmj66 on January 02, 2014, 10:03:07 PM
Quote from: JamoZ on January 01, 2014, 01:39:12 PM
Thanks hawk, fixed!

Its saying it has been removed again mate  :(

Ignore last message from me i was clicking wrong link   :P
Title: Re: R6 Screamer Update
Post by: Hawk on January 02, 2014, 11:02:15 PM
Quote from: JamoZ on January 01, 2014, 01:39:12 PM
Thanks hawk, fixed!

Glad to help, JamoZ. ;)
Title: Re: R6 Screamer Update
Post by: skerp on January 03, 2014, 10:45:49 AM
 Great Sound Warlock !! Bad Boy. 8)
Title: Re: R6 Screamer Update
Post by: C21 on January 03, 2014, 11:32:22 AM
sounds reaaallllyy nice!!!  ;D
Great job!
Title: Re: R6 Screamer Update
Post by: Warlock on January 03, 2014, 02:10:21 PM
 :) thank you guys!

Hehehe hey Bad Boy! long time no see !   8)
Title: Re: R6 Screamer Update
Post by: skerp on January 03, 2014, 04:01:35 PM
it is true my friend! work with gpbikes Italy too hahaha
soon we will see you on the track like the old days!
Congratulations again for your work! ;)
Title: Re: R6 Screamer Update
Post by: Shoop46 on September 08, 2014, 11:47:54 PM
could i get a link fix please?
not working for me :(
... or is this the old r6?
Title: Re: R6 Screamer Update
Post by: GhostdogNL on September 09, 2014, 05:53:39 PM
link not working anymore  :o
Title: Re: R6 Screamer Update
Post by: Warlock on September 09, 2014, 08:55:21 PM
Try here:

https://dl.dropboxusercontent.com/u/100893791/R6%20screamer%20sound.rar

But is for the old R6 , won't work for the new one, i don't have the needed engine.scl file of the old one.  :-\
Title: Re: R6 Screamer Update
Post by: PeterV on September 09, 2014, 09:10:47 PM
i just copied warlocks sound into the new r6 and seems too work.

Zip file contains the SB2 soundfiles and the Engine.scl

Old R6 sounds (http://we.tl/85ukU2bqwo)
Title: Re: R6 Screamer Update
Post by: JamoZ on September 09, 2014, 09:17:05 PM
Quote from: Warlock on September 09, 2014, 08:55:21 PM
Try here:

https://dl.dropboxusercontent.com/u/100893791/R6%20screamer%20sound.rar

But is for the old R6 , won't work for the new one, i don't have the needed engine.scl file of the old one.  :-\

dropbox ;)
Title: Re: R6 Screamer Update
Post by: GhostdogNL on September 10, 2014, 07:53:27 PM
i dont know ..but i did put it in and it sounds like a 15 year old car race game ...
Title: Re: R6 Screamer Update
Post by: Warlock on September 10, 2014, 08:27:05 PM
The missing engine.scl file dictates the revving parameters of the sounds, it may change a lot with the incorrect .scl and it could sound awful
Title: Re: R6 Screamer Update
Post by: GhostdogNL on September 11, 2014, 08:35:36 PM
yup i dont have the engine file haha ..
Title: Re: R6 Screamer Update
Post by: -aGy- on October 16, 2014, 01:54:27 PM
can somebody upload engine.scl file please.or copy paste here
Title: Re: R6 Screamer Update
Post by: -aGy- on October 16, 2014, 04:10:11 PM
 

MaxValue = 17000.000000
AutoPitch = 1
Layer0
{
   NumSamples = 5
   sample0
   {
      wav = sb2_onidle.wav
      NumPoints = 3
      point0
      {
         Value = 0.000000
         Volume = 1.000000
      }
      point1
      {
         Value = 0.177647
         Volume = 1.000000
      }
      point2
      {
         Value = 0.224706
         Volume = 0.000000
      }
      RefPitch = 0.176471
      MinPitch = 0.000000
      MaxPitch = 1.273335
   }
   sample1
   {
      wav = sb2_onverylow.wav
      NumPoints = 4
      point0
      {
         Value = 0.175294
         Volume = 0.000000
      }
      point1
      {
         Value = 0.222353
         Volume = 1.000000
      }
      point2
      {
         Value = 0.260000
         Volume = 1.000000
      }
      point3
      {
         Value = 0.307059
         Volume = 0.000000
      }
      RefPitch = 0.235294
      MinPitch = 0.745000
      MaxPitch = 1.304998
   }
   sample2
   {
      wav = sb2_onlow.wav
      NumPoints = 4
      point0
      {
         Value = 0.262353
         Volume = 0.000000
      }
      point1
      {
         Value = 0.303529
         Volume = 1.000000
      }
      point2
      {
         Value = 0.396470
         Volume = 1.000000
      }
      point3
      {
         Value = 0.455294
         Volume = 0.000000
      }
      RefPitch = 0.323530
      MinPitch = 0.810907
      MaxPitch = 1.407271
   }
   sample3
   {
      wav = sb2_onmid.wav
      NumPoints = 4
      point0
      {
         Value = 0.395294
         Volume = 0.000000
      }
      point1
      {
         Value = 0.450589
         Volume = 1.000000
      }
      point2
      {
         Value = 0.536471
         Volume = 1.000000
      }
      point3
      {
         Value = 0.602353
         Volume = 0.000000
      }
      RefPitch = 0.500000
      MinPitch = 0.790588
      MaxPitch = 1.204706
   }
   sample4
   {
      wav = sb2_onhigh.wav
      NumPoints = 3
      point0
      {
         Value = 0.536471
         Volume = 0.000000
      }
      point1
      {
         Value = 0.598824
         Volume = 1.000000
      }
      point2
      {
         Value = 1.000000
         Volume = 1.000000
      }
      RefPitch = 0.676471
      MinPitch = 0.793043
      MaxPitch = 1.678260
   }
}
Layer1
{
   NumSamples = 6
   sample0
   {
      wav = sb2_idle.wav
      NumPoints = 3
      point0
      {
         Value = 0.000000
         Volume = 1.000000
      }
      point1
      {
         Value = 0.092941
         Volume = 1.000000
      }
      point2
      {
         Value = 0.132941
         Volume = 0.000000
      }
      RefPitch = 0.073529
      MinPitch = 0.000000
      MaxPitch = 1.808011
   }
   sample1
   {
      wav = sb2_offidle.wav
      NumPoints = 4
      point0
      {
         Value = 0.094118
         Volume = 0.000000
      }
      point1
      {
         Value = 0.128235
         Volume = 1.000000
      }
      point2
      {
         Value = 0.188235
         Volume = 1.000000
      }
      point3
      {
         Value = 0.228236
         Volume = 0.000000
      }
      RefPitch = 0.176471
      MinPitch = 0.533335
      MaxPitch = 1.293335
   }
   sample2
   {
      wav = sb2_offverylow.wav
      NumPoints = 4
      point0
      {
         Value = 0.184706
         Volume = 0.000000
      }
      point1
      {
         Value = 0.227059
         Volume = 1.000000
      }
      point2
      {
         Value = 0.280000
         Volume = 1.000000
      }
      point3
      {
         Value = 0.317647
         Volume = 0.000000
      }
      RefPitch = 0.235294
      MinPitch = 0.784998
      MaxPitch = 1.349998
   }
   sample3
   {
      wav = sb2_offmid.wav
      NumPoints = 4
      point0
      {
         Value = 0.397647
         Volume = 0.000000
      }
      point1
      {
         Value = 0.454118
         Volume = 1.000000
      }
      point2
      {
         Value = 0.548235
         Volume = 1.000000
      }
      point3
      {
         Value = 0.577647
         Volume = 0.000000
      }
      RefPitch = 0.500000
      MinPitch = 0.795294
      MaxPitch = 1.155294
   }
   sample4
   {
      wav = sb2_offhigh.wav
      NumPoints = 3
      point0
      {
         Value = 0.544706
         Volume = 0.000000
      }
      point1
      {
         Value = 0.577647
         Volume = 1.000000
      }
      point2
      {
         Value = 1.000000
         Volume = 1.000000
      }
      RefPitch = 0.676471
      MinPitch = 0.805217
      MaxPitch = 1.678260
   }
   sample5
   {
      wav = sb2_offlow.wav
      NumPoints = 4
      point0
      {
         Value = 0.281177
         Volume = 0.000000
      }
      point1
      {
         Value = 0.311764
         Volume = 1.000000
      }
      point2
      {
         Value = 0.397647
         Volume = 1.000000
      }
      point3
      {
         Value = 0.452941
         Volume = 0.000000
      }
      RefPitch = 0.323530
      MinPitch = 0.869091
      MaxPitch = 1.399998
   }
}