Hi Guys,
So Sh@rk asked if I could help with using x360ce and I thought it might be helpful if I made a few videos to do this. This is really not needed in the wonderful GPBikes as Piboso has given us the best controller input and setup of any and all bike games and simulations. This is more for custom controls or wheel systems in games from folks like Milestone who think the world plays games only with gamepads....................
This is my first video tutorial so please tell me my main fuckups and what I should do to make them better. Sorry they are only in English. I speak fluent German but it was bad enough in English lol.
It is best watched in full HD as it is made, so as to see the screen for better understanding. Grab a coffee and something to snack as it is 28 mins long. Hope you dont fall asleep.
Enjoy DD
https://www.youtube.com/v/Ts973LaWCFE
Merci doubledragoncc...
Je regarderait la video semaine prochaine pour essayer de faire reconnaître le BU036X dans x360ce
J'ai une présentation ce week end ...
Merci encore
@Sh@rk
I hope it helps you. I will make a BU0836X/A specific video in the next few days. Important axis info to make sure the boards are wired to work with most games.
DD
hello dd
pouriez vousme make a scheme to connect the bu0836x with the buttons and potentiometers and joystique for Millestone games, I just bought Valentino rossi the game.
and I wanted to run my simulator with the bu0836x.pour x360ce.
thank you
So did it work out okay for you Sh@rk
Sorry I can not write in French
DD
Non,je n'es pas installé le joystique sur le simulateur,le 360ce ne fonctionne pas sans le joystique
No, I 're not joystique installed on the simulator , the 360ce does not work without the joystique
You must remove the joystick data from the ini file for x360ce
It is best to start new and only use the BU on its own when making the ini
I will paste a BU0836X ini here in a bit.
DD
EDIT so this is a normal BU0836X ini for x360ce. Each BU has its own number(IN RED) you would need to putthe number for yours in
[Options]
UseInitBeep=1
Log=0
Console=0
DebugMode=0
InternetDatabaseUrl=http://www.x360ce.com/webservices/x360ce.asmx
InternetFeatures=1
InternetAutoload=1
AllowOnlyOneCopy=1
ProgramScanLocations=C:\Program Files,C:\Program Files (x86)
Version=2
CombineEnabled=0
Supplemental=0
[InputHook]
HookMode=1
[Mappings]
PAD1=IG_f5a727c0e2ec11e58001444553540000
PAD2=
PAD3=
PAD4=
[PAD1]
[PAD2]
[PAD3]
[PAD4]
[IG_f5a727c0e2ec11e58001444553540000]
ControllerType=1
Left Analog X=x1
A=5
ProductName=BU0836X Interface
ProductGuid=10011dd2-0000-0000-0000-504944564944
InstanceGuid=f5a727c0-e2ec-11e5-8001-444553540000
PassThrough=0
ForcesPassThrough=0
PassThroughIndex=0
Right Trigger DeadZone=0
Left Trigger DeadZone=0
Combined=0
CombinedIndex=0
A DeadZone=0
B DeadZone=0
X DeadZone=0
Y DeadZone=0
Start DeadZone=0
Back DeadZone=0
Left Shoulder DeadZone=0
Left Thumb DeadZone=0
Right Shoulder DeadZone=0
Right Thumb DeadZone=0
AxisToDPadDownDeadZone=0
AxisToDPadLeftDeadZone=0
AxisToDPadRightDeadZone=0
AxisToDPadUpDeadZone=0
AxisToDPad=0
AxisToDPadDeadZone=256
AxisToDPadOffset=0
Left Analog X+ Button=0
Left Analog X- Button=0
Left Analog Y+ Button=0
Left Analog Y- Button=0
Left Thumb=0
Left Analog X DeadZone=0
Left Analog Y DeadZone=0
Left Analog X AntiDeadZone=6553
Left Analog Y AntiDeadZone=0
Left Analog X Linear=0
Left Analog Y Linear=0
Right Analog X+ Button=0
Right Analog X- Button=0
Right Analog Y+ Button=0
Right Analog Y- Button=0
Right Thumb=0
Right Analog X DeadZone=0
Right Analog Y DeadZone=0
Right Analog X AntiDeadZone=0
Right Analog Y AntiDeadZone=0
Right Analog X Linear=0
Right Analog Y Linear=0
UseForceFeedback=0
FFBType=0
SwapMotor=0
ForcePercent=0
LeftMotorDirection=0
LeftMotorStrength=0
LeftMotorPeriod=0
RightMotorDirection=0
RightMotorStrength=0
RightMotorPeriod=0
B=4
X=7
Y=8
Right Trigger=a3
Left Trigger=a4
Left Analog Y=5
D-pad Up=12
D-pad Left=14
D-pad Right=13
D-pad Down=11
Back=1
Start=6
Left Shoulder=10
Right Shoulder=9
Hope this helps
réservoir DD
BON TRAVAIL
http://youtu.be/5No0bJMtFqU (http://youtu.be/5No0bJMtFqU)