Possibility of adding a turbo
https://www.youtube.com/v/AwwHMshSMyc
Technically the H2 has a supercharger (driven off engine speed), and a turbocharger (like my bike) is driven by exhaust gas. I'm personally unsure how the engine files would handle a turbocharger, maybe a secondary file that has the boost mapping? Or a section of the config file that determines the boost level versus rpm, throttle position, etc.?
The biggest question I have is weather the RX car on WRS has the key to how to implement it into GP Bikes.
(http://i645.photobucket.com/albums/uu175/RatFighter/Bandit%201200/P8100007_zps165171fa.jpg) (http://s645.photobucket.com/user/RatFighter/media/Bandit%201200/P8100007_zps165171fa.jpg.html)
Little rev before the floats were adjusted to suit the tune. 9000rpm with the gate set at 1 bar (14psi), came into boost with demonic anger. Upping boost to 1.6-1.8 bar (24-26psi) next summer... :o
https://www.youtube.com/watch?v=n9MHm39-_7E
:)
Quote from: HornetMaX on December 11, 2016, 07:27:36 PM
Quote from: iVolution on December 11, 2016, 05:29:57 PM
Nice work on the dash Manu! I hope Gpbikes allows you to put the turbo whistle in as well, would add a lot to the authenticity i guess
It shouldn't be too hard I think, it's just rpm driven.
But technically it's not a turbo, just a supercharger :)
No need for a second file, just additional samples in the throttle ON layer. Putting nothing for the turbo in the OFF layer will make the turbo sound intensity vary with throttle position: it's probably not technically perfect, but should be enough.