Everything worked okay up to Mod V1.3.0 then along came Mod V1.3.1
From that moment I have had problems trying to connect to the servers. In particular the following while using Yamaha R6.
Hotlap +MOD 1.3.1 - R6 Victoria Joins OKAY.
Track 21 +MOD 1.3.1 open Victoria "Data Mismatch"
Track 21 +MOD 1.3.1 open Assen "Data Mismatch"
Track 22 +MOD 1.3.1 open Albi "Data Mismatch"
Track 25 +MOD 1.3.1 open Brands Indy "Data Mismatch"
Track 19 Training Dry Groove open " Bike unknown to server"
Max dedicated server "Data Mismatch"
I have gone to the trouble of downloading all known mods including helmets and all paints and have done a reinstall of bikes, helmets, and paints, of Mod V1.3.0 plus updates of V1.3.1.
Still the same problem persists
Tried other bikes, Ducati GP8, Honda 213, Yamaha M1, and get the same results.
As I can join Hotlap +MOD 1.3.1 - R6 Victoria okay I believe that in itself shows that I have the up todate Mods installed.
Has anyone else had any problem as described above, and if so how did you get out of it?
Thank you for reading
Seajay
Forget my server, it was for a quick test for C21 and it was not configured properly.
MaX.
whe you have installed new version of bikes, have you deleted the old folder before past the new?
Sometimes you can past and replace existing files but older with another name keep in the folder.
You need the new scooter I think, it wasn't added to the whole multibike download. I put this in and could join again, real pain in the ass I couldnt join any server all weekend.
try adding that bike from just the bike section see if it works
Quote from: janaucarre on January 28, 2014, 04:59:14 PM
whe you have installed new version of bikes, have you deleted the old folder before past the new?
Sometimes you can past and replace existing files but older with another name keep in the folder.
Quote from: RBp on January 28, 2014, 07:14:30 PM
You need the new scooter I think, it wasn't added to the whole multibike download.
try adding that bike from just the bike section see if it works
If you do both these things it should work.
Thank you all for your replies
Deleted the scooter and then reinstalled it again, and on the R6 and GP8 I can now connect to Track 21 server okay.
Tomorrow I will have more time to test the rest, and my gut feeling is that it will work fine.
Many thanks again for your help
Regards
Seajay