PiBoSo Official Forum

GP Bikes => General Discussion => Topic started by: sdecorme on June 21, 2016, 02:02:12 PM

Title: lean left rigth speed
Post by: sdecorme on June 21, 2016, 02:02:12 PM
Hi,
Back again, this time I'm trying to understand how the lean Left/right works .
My profile.ini is the default config . So the lean L/R of the moto is my joystick position.
Is it possible the accerelate the lean L/R movement of the moto .
If the moto is Lean on the left it takes long time to go to the right side.
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 21, 2016, 02:13:48 PM
You may need to make sure you have Lean Linearity to 100% and Direct Lean will effect the lean speed of reaction to controller input.

DD
Title: Re: lean left rigth speed
Post by: sdecorme on June 21, 2016, 02:25:35 PM
All the commands have 100% linearity.
Tomorrow I will make a film to show the difference of speed between the Lean order and the moto reaction.
Title: Re: lean left rigth speed
Post by: Napalm Nick on June 21, 2016, 02:36:04 PM
It is not a linearity setting it is the slider called Direct Lean did you try that?
Title: Re: lean left rigth speed
Post by: CapeDoctor on June 21, 2016, 03:56:11 PM
i agree with Nick - sounds like the direct lean needs to be adjusted.
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 21, 2016, 03:57:52 PM
I did say to him in my first post but did not write it clear enough lol. It sounds like he has DL at 0- 10%

DD
Title: Re: lean left rigth speed
Post by: CapeDoctor on June 21, 2016, 05:02:26 PM
i bet it's on 0%  ;)
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 21, 2016, 06:41:10 PM
I want it to go to 150% lol and I am serious lol

DD
Title: Re: lean left rigth speed
Post by: BOBR6 84 on June 21, 2016, 06:45:23 PM
Quote from: CapeDoctor on June 21, 2016, 05:02:26 PM
i bet it's on 0%  ;)

I bet it's on 15% how much??  ;D
Title: Re: lean left rigth speed
Post by: Vini on June 21, 2016, 07:42:28 PM
i'll bet 36%
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 21, 2016, 07:45:29 PM
I would say 0% as he has not adjusted it since installing GPB or he would have known about it.

DD
Title: Re: lean left rigth speed
Post by: Vini on June 21, 2016, 07:57:42 PM
good point
Title: Re: lean left rigth speed
Post by: BOBR6 84 on June 21, 2016, 08:03:24 PM
How much??  ;D
Title: Re: lean left rigth speed
Post by: Vini on June 21, 2016, 08:48:43 PM
i'll put 5€ into the "owners club (elgato) paypal account" if i'm wrong :D
Title: Re: lean left rigth speed
Post by: Hawk on June 21, 2016, 10:00:04 PM
Default setting for "Direct Lean" as far as I remember is 15%.... I'm pretty sure on that but could be wrong of course.  ;)

Hawk.
Title: Re: lean left rigth speed
Post by: BOBR6 84 on June 21, 2016, 10:02:59 PM
 ;)
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 21, 2016, 10:21:36 PM
LOL now its a gamble as to which is default setting for DL lol

SO I an not going to give a number and say its at default % as that is what I mean he has.

I dont gamble so it dont matter if I win or lose lol

DD
Title: Re: lean left rigth speed
Post by: sdecorme on June 22, 2016, 06:26:24 AM
 :-[ :-[ :-[ Ok the first beer is for me Direct lean was 15% . I've forgot to put it to 100% after the reinstallation.
Now it works perfectly.

Thanks you guys even if you make me feel stupid  ;)
Title: Re: lean left rigth speed
Post by: CapeDoctor on June 22, 2016, 07:13:10 AM
good to hear you solved it.
aaaaand......the winner is..... Hawk!  ;D
Title: Re: lean left rigth speed
Post by: Hawk on June 22, 2016, 07:26:24 AM
Quote from: CapeDoctor on June 22, 2016, 07:13:10 AM
good to hear you solved it.
aaaaand......the winner is..... Hawk!  ;D

Yey! I've actually won something! Hehe!

But I'll gladly share that honour with Bob who also stated 15%.... Well done to us Bob! Lol!  ;D 8)

Hawk.
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 22, 2016, 08:51:13 AM
Wait up...........I said default, I may have said 0% to start as I thought that is what default is so I get to lick some ice cream too nananananana lol

Glad you sorted it bro

DD
Title: Re: lean left rigth speed
Post by: CapeDoctor on June 22, 2016, 09:05:11 AM
k, so Hawk, Bob and DD share the podium spots for this one, then
i'll let yo guys fight it out for who takes which spot ....  ;D
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 22, 2016, 09:06:49 AM
No body cares about who did what DOC everyone helps everyone here if we can so no claim to fame.

DD

Title: Re: lean left rigth speed
Post by: CapeDoctor on June 22, 2016, 09:20:32 AM
agreed, mate - helping someone out is what these forums are for, to a large degree, so yeah....  8)
Title: Re: lean left rigth speed
Post by: BOBR6 84 on June 22, 2016, 06:45:51 PM
Aaaand the winner is... GPBOC  ;)

Quote from: vin97 on June 21, 2016, 08:48:43 PM
i'll put 5€ into the "owners club (elgato) paypal account" if i'm wrong :D

Title: Re: lean left rigth speed
Post by: doubledragoncc on June 22, 2016, 07:43:48 PM
Thats a point and whatever I have from the system I am making for Matty goes into the club too. So an Elgato for live streams is getting closer.

DD
Title: Re: lean left rigth speed
Post by: BOBR6 84 on June 22, 2016, 07:50:41 PM
Nice bit of kit.. il chuck a fiver in too  :D
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 22, 2016, 08:03:04 PM
Nice one BOBPPPP............have some extraPPPPPPP for that.

I will get the HD60S which is USB3 and will make it 0 latency between the game screen and stream.

We are not far off from getting it really I have been putting in 5 quid each time I get my money so its building up.

DD
Title: Re: lean left rigth speed
Post by: Vini on June 22, 2016, 11:07:32 PM
what was the paypal address again?
Title: Re: lean left rigth speed
Post by: doubledragoncc on June 23, 2016, 05:44:09 AM
Your a  gentleman and a man of your word Vin.

The PayPal email address is: doubledragoncc@yahoo.com

Thank you on behalf of all the GPBOC members.

We are getting closer to the HD60S

DD