• Welcome to PiBoSo Official Forum. Please login or sign up.
 
March 28, 2024, 11:41:22 AM

News:

GP Bikes beta21c available! :)


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - poupou59890

1
Custom hardware / Re: Sim-Setup Project Idea
August 22, 2019, 01:03:26 PM
Hi,
chris yes that's the question everyone wants to have the answer, in my case, I had the change to try the AMV sim (same than motogp rider use to develop position and fitness during winter, it is a real bike with real lean but you are not control the video, it is just a playback of a race and you need to follow, when you stop to throttle you can lean and you need to use our weight in order to do that and then when you trottle again at the exit the sim tend to be straight again so help you a little bit , so yes it is very physical but so cool to have your bike leaning at 58 durin my test. But yes I made 3 laps of Le mans and I was exausted but the feeling is really good. so I think it is a way to implement that in gpbikes using coder and realtime lean value.
but yes it could be dangerous or brutal.

But if you have the chance to try it, do it.
2
Custom hardware / Re: Sim-Setup Project Idea
August 21, 2019, 05:19:33 PM
Hi everyone,

as all here I already saw this video and this kind of vids push me to make mine, but yes on this video I think the lag between commands and tv is so much than everything seems disconnect, so yes I don't think that is fun to ride. but technically is awesome and super super smooth and beautiful. Just need to concentrate more on the lag input. But know a lot people can use VR so everything is different, I will use VR too with my rig so sit on or not it is not a problem, with gpbikes and Vr normally I can't feel the bike not sync with my feeling.

I am agree with Matty, pneumatic will be pricey, linear actuator can do the trick but need to be well calculated in order to have right range and speed (and torque)

When my sim will be completly finish and hopefully working like I want, I will try to focus very strong on this part because i think it could be really fun to feel the lean and the front/rear movement when you are on the brake. It can be a dream but I will try to give it a go, and find some mechanical solution and cinematic which could work.

3
Custom hardware / Re: Sim-Setup Project Idea
August 20, 2019, 04:32:11 PM
Hi,

welcome on the forum.

For the sim rig of course it is a good idea and we like to see new rig coming (i hope finishing mine soon), for button etc I think that's better to use a complet wheel setup, will be easier and reliable (and you will have force feedback too) especially if you want to use countersteerin.

For the axis, i am not sure yet if it is as good idea, (mine is fix for now, I will see hen it is finish if I can put lean)

issues with axis like real one is the range, if you want to simulate real lean you can have +60/-60 like I want but you need to have strong motor because torque is very big when you are full lean. so big money....

but yes everything is possible and you can take lots of data in real time.

I think that hydraulic it is not quick enough or you need electric piston and that's money too.

For me I started with a fix rig, and when everyhting will be like I want ..then I will thinking about a dynamic sim.
4
Custom hardware / Re: T300 RS WHEEL
August 20, 2019, 04:26:43 PM
Hi,

welcome on the forum, I am making a sim rig base on the t300rs too, so yes if you want to use only the entries provided by the t300rs you juts need to plug your usb (if you already instal all firmware and software) and that's it.

If you need more button or axis you can buy a USB encoder from Leobodnard, it is very easy and no coding.
and everything is plug and play.

Than you need to do the calibration.

If you attempt to use DSA mode, you need to change the rotation of the wheel in the software, If I remember weel I put 50° (so -25/+25)
and it is perfect.

T300rs is very accurate on the center deadzone so yes it is perfect for those kind of sim.

Good luck and see you on track.
5
Support / Re: Beta 15b, only M2 available
August 18, 2019, 08:47:26 PM
Hi, **thanks a lot I just did that and now everything is perfect.
thank you so much.
6
Support / Re: Beta 15b, only M2 available
August 18, 2019, 05:21:13 PM
Hi, thanks for your reply, but I already put all my bikes files in bikes under gpbikes (not in program files but on my data hard drive F:)
please see attached pictures,I do not know what to do now...
7
Support / Re: Beta 15b, only M2 available
August 17, 2019, 10:34:32 AM
Higuys, I have an issue with GPB15b, I instal it on a new computer, I installed the gpbikes files on my F: data harddisk, and in the documents i have the PIboso files with profiles etc, but when I use itit only show the M2 bike, I have downloaded almost all the database from DD, I put everything in bikes folder under gpbikes, but nothing appears, I have tyres too, tracks too etc, tracks is ok but I cannot see the bikes...

Someone have an idea ? thanks a lot

8
final picture with foot lever, I use poly of ZX10RR 2011, everythign is exactly at the right place.

9
other picture
10
HI,

please find below some pics of my actual rig, to finishi it I need to put gear change switch, need to make the pivot stronger (attach of the wheel) and try to find a solution to have braking more linear with the hydraulic system (or change it for potentiometer with the right spring)

11
Hi guys, sorry for the delay, I did not have time past weeks to work on it, I moved from south to north of France for personnal reasons so I did not have time to finish it.... I will keep back my rig on september (still in the south) so when I will have it again I will have time to finish it (I Hope..) I will keep you updated. I have somes pics, I will try to put it today.
thanks
12
HI guys,

Sorry i did not have time this week, hopefully next week I will have time to mount gear lever and finally strentghten the handlebar....I have 3 weeks to finish this rig...

I will keep you updated :)

for the pictures I will try to send it next week
13
Bikes / Re: NEW BIKE database
July 12, 2019, 09:33:31 AM
Thanks a lot for all your work DD, such database need hard work so thanks for that :)
14
Bikes / Re: NEW BIKE database
July 12, 2019, 06:14:28 AM
AWESOME JOB DD, thanks a lot. tonight I will download again all the bikes for fresh instal :) thanks .

Those bikes are B15 already or need to change log  before ?

Thanks
15
Hi Folks,

Just to let you know, I install everything on my chassis,  put the t300rs, polys, and foot lever at the right place, everything is fine, the only issue I have is that the plastic part I use to connect t300rs and my handlebar is not strong enough, when i am on the bike and try to lean the plastic part start to crack... so I found the solution I will use a steel pivot and then I will connect it to the t300rs so the wheelbase never see any weight or strengh. I will do that this week I hope, then I need to finally finish my gear change lever and everything will be set up for the first start.

It looks quite good for now :) I will make a full post about my project when it will be done, so you will have all info or feedback I had..

Just need to weld everything correctly now that everything is in place.

I will keep you updated :)

Have a nice day everyone.