Hi friends can i join this cup now?
Many thanks!
Many thanks!
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Quote from: doubledragoncc on April 16, 2019, 03:21:56 PMGreat system Cyborg.
G27 was my first mod as well lol. I ran with 40 degrees of steering angle if I remember. What do you set yours at?
DD
Quote from: passerBy on April 16, 2019, 03:54:01 PMQuote from: cyborg chip on April 16, 2019, 03:13:21 PMthanks for reply.You are welcome. I actually meant that you are using just the right mode I'll share the values I use:
i did use the direct steer 2 code, i'll try other values combination. the g27 really have a bad ffb :/.
profile.ini[hardcore]
directsteer=2
directsteer_maxangle=25
In the Logitech profiler I set Degrees of Rotation to 50°
Now, since all the bikes in GPB (as far as I know) have the steering lock of 25°, that gives us 1:1 steering (because Logitech profiler counts the whole span from one lock to the other, while GPB needs only the angle to one side with the other being the exact same).
I don't run maximum FFB, since not only that distorts what you feel, it can theoretically make you drop the bike because of how violent it gets at times. 60% to 70% should be fine. And yeah, you are right, G27 has a notoriously bad FFB. I have a feeling any half-decent Thrustmaster would be better in this role.
I turn all the helpers off except for the front/back rider lean (until I get my head tracking up and running again) and have the left/right rider lean on the uppermost left and right buttons on the wheel. Also, not having a separate axis for the rear brake and not wanting to give up the clutch, I simply assigned both brakes to the brake pedal. You need to tweak the rear brake curve and span to make it not lock your rear wheel up.
The other Simulation settings are as follows:
Field of View: 74
Pitch: 30%
Tilt: 25%
No Free Look at the moment, no Corner Anticipation. I ride from the first onboard camera that shows the rider's lean.
@DD, give these settings a try too, DD