Messages

New update (2018 WorldSSP Yamaha R6 V1.2 MOD) to fix wet tyre problem

Hello julien113.

Thank you for a wonderful bike.

I have the same problem.

There is no problem with victoria, but problems occur with some MOD tracks. For example Chang International, Mugello, Assen, Jerez.

I found a problem by describing the .tyre file.
If "Key0 = 0  ,  1.00", the game crashes on wet road surface.
If "Key0 =  " is a positive number it will not crash. For example, "Key0 = 0.000001  ,  1.00".

I do not know why there is a difference between Victoria and MOD tracks.

I also expect the next bike. goodbye.

Ok thanks i am going to change that and make an update.

In the wet the bike seems to make the game crash as soon as you go to track, even if you have dry tyres on...

NEEDS A FIX PLEASE[/size]

Sorry but i test it and it work well...
No problem for me

Try to change the R6_idle.wav in bike folder by this one to fix the sound problem:
http://www.mediafire.com/file/7r4k4r86vw36cyk/R6_idle.rar

it's change in the main link too

Julien the bike is perfect but i just feel the sc1 needs the new sc0 grip and the sc0 must get better grip.

After really trying to setup the bike i was only .2 slower then yesterday and it seems to be getting better toride but just the tyres need work then its the best bike that has surfaced in GPB.

Good job man

Thanks dude!

My opinion on V1.1: My favorite bike in GPB

Bike seems slower then yesterday round about 0.5 a lap.
Under steer on exit of the corners is bad.
Traction out of the corner is way worse then yesterday seems like the SC2 grip from yesterday has become SC0.
The sound bug is very annoying. XD

Still my Favorite bike in GPB at the moment

Thanks for your opinion! 
I will try to fix some problem, the grip is more real i think.
And for the sound if someone coul'd help me... (contact in mp)
I am happy because i spend lot of weeks to create this bike!
I will try to make other ssp bikes (Honda, kawasaki...) i will be more simple because 3D models already exist...(in other games) but for this yamaha i made a lot, lot lot of work for the 3D model.
Thanks everybody!!!

Update in a few minutes to erase steering wobble!!! 

My Review:

Absolutely amazing bike, best physics i have ever seen on this game with regards to the way the bike behaves however this just 1 thing that needs fixing and thats a front end wobble from mid-turn to the exit, i will post a replay so you can have a look

Amazing work though

Yess for sure, in the middle of slow corner there is this wobble problem, i will try to fix it!
I think with some suspension adjustment you can reduce it
But thanks for this review!!!

[TYRES INFO:]

TYRES INFO:
DRY:
Optimal pressure when HOT (around 90 or 100°C)
2.30 Bar for the front / 1.70 Bar for the rear (like in real)
For the rear tyres:
SC0 very good grip but for only 6 or 7 laps (depend to your style of riding)
SC1 good grip  but around 0.7 to 1.2 seconds slower than SC0 (you can make a 18 laps race but slippery in 5 final laps)
SC2 less grip but very constant

WET:
Optimal pressure when HOT (around 65 or 75°C)
2.10 Bar for the front / 2.00 Bar for the rear


ECU INFO:
TC (traction control) settings: 0 to 6

RIDING AIDS INFO:
Turn off automatic shift, shift help, traction help, wheeling help and brake help in simulation page

SPECIAL THANKS for their help to:
Wimp, Tosteetos, KG_03, Blackheart and more...

Download 2018 WorldSSP Tyres


Download 2018 WorldSSP Yamaha R6 v2.1


Download 2018 WorldSSP Honda CBR 600RR v2.1


Download 2018 WorldSSP Kawasaki ZX6R v2.1


Download 2018 WorldSSP MV Agusta F3 v2.1


TEMPLATES:

Download 2018 WorldSSP Yamaha R6 Template
Download 2018 WorldSSP Honda CBR 600RR Template
Download 2018 WorldSSP Kawasaki ZX6R Template
Download 2018 WorldSSP MV Agusta F3 675 Template

Nice! 

Are you "juju" ?

No i don't think i am "juju" 

I can't ride for the first race, not at home...

Nice skins dude!!!!

Thanks Julien!! if it weren't for your help of the Suter 3d, i wouldn't be able to finish many important areas of the livery

Wait 3D? how? what? and where?
Doing these skins in 2D is such a pain! I was wondering how you got those numbers so perfectly center

it's my gift Wimp, it'll be easier with that!!!
3d model suter: http://www.mediafire.com/file/62y6p030rym1q61/sutermmx.3DS
Link how to do that: http://blogs.adobe.com/richardcurtis/2015/08/14/creativefriday-adding-a-label-on-a-bottle-with-photoshop-3d-projection/

No fcking way! Can I ask how you got the 3D model ?

Also I tried it but have no clue how to do it ... I'm so bad at photoshop
1. the 3D image seems to be very low detailed? maybe its my settings or something?
2. Can't seem to paste the decals properly without it going all over the place when using merge down.
3. How do you get the 2D file(tga) out of that 3D model needed for creating the .pnt file for paints?

I take the 3d model from motogp17 game
The 3d model is not low detailed it's just your setting on photoshop (open it with a bigger resolution), search some good tutorials on google because it will be very long to explain...
I will try to do a tutorial for this

Nice skins dude!!!!

Thanks Julien!! if it weren't for your help of the Suter 3d, i wouldn't be able to finish many important areas of the livery

Wait 3D? how? what? and where?
Doing these skins in 2D is such a pain! I was wondering how you got those numbers so perfectly center

it's my gift Wimp, it'll be easier with that!!!
3d model suter: http://www.mediafire.com/file/62y6p030rym1q61/sutermmx.3DS
Link how to do that: http://blogs.adobe.com/richardcurtis/2015/08/14/creativefriday-adding-a-label-on-a-bottle-with-photoshop-3d-projection/

[KYT ADRacing Team#92 - Adrian Melandri & #86 - DidietXFuera & #49 - AsrilYellow]

Relaunching : KYT ADRacing Team

#92 - Adrian Melandri & #86 - DidietXFuera & #49 - AsrilYellow



Download Here :
http://www.mediafire.com/file/9sqsv6b4db0fnpf/Suter+KYT+ADRacing.rar

Notes :
Rider : Manu Modern Rider Model 1
Bike : Suter MMX2
Helmet : KYT KR-1

*big thanks to Julien for the suter 3d file to make the bike easier to modify

Nice skins dude!!!!