• Welcome to PiBoSo Official Forum. Please login or sign up.
 
October 05, 2022, 02:19:48 AM

Motion rig project

Started by Chris_Beeves, September 01, 2021, 06:42:44 PM

Previous topic - Next topic

Chris_Beeves

Thank you so much guys!

Had some time to play around with it a little more tonight after fixing stuff with the motion plugin.
It's marvelous...
I had to try..

Chris_Beeves

After testing more in depth I'm finding some issues with the leaning. The design leaves the two front motors in charge of that, and when leaning hard one goes all the way up and the other one all the way down. The one going up has to lift everything, and it takes a lot of time. So it will need some attention. Or I need to lose 20-30kg. Or both.
I had to try..

Chris_Beeves

After designing a few possible solutions I gave up and just bought two spring struts.
Works perfect!
Let the tweaking begin!
I had to try..

Chris_Beeves

After putting the front springs on it became apparent that the rear was struggling as well, so I bought another spring.
Now on to other issues!
Redesigned the shifter mechanism, since everyone else that has tested the rig has broken it :D
I had to try..