IASystems Hs2 StreetFighter system

[doubledragoncc]

NO way Max. It would mean I could not guarantee the system works to start with and them many who buy the system wont necessarily know dick about brake systems. That is a big no way bro.

DD

[HornetMaX]

NO way Max. It would mean I could not guarantee the system works to start with and them many who buy the system wont necessarily know dick about brake systems. That is a big no way bro.

You fill it, you test it, you purge it, you ship it. Job done.

That said, I really don't think we need to go as far as hydraulic: higher cost, higher mess, moderate gain. But I'll let you experiment and report back

[BOBR6 84]

Yes I can make a set with clip-on type bars but they must be 22mm bars.

I use Vortex clip-ons.. All the bars are 22mm. only the clamp changes size for different bikes/forks so im guessing most actual bars must be the same or similar size?

[doubledragoncc]

I could not even ship fluid with the system that is the whole point. Certain countries do not allow it to be imported, certain airline wont ship it. It is a big problem for a small guy like me. It is only for much later anyways.

I need to talk to the car pedal guys about it anyways they know what to do.

I actually think it would be only a small advantage over the cost as you said,, but it would look the dogs bollocks hehe.

DD

[HornetMaX]

I could not even ship fluid with the system that is the whole point. Certain countries do not allow it to be imported, certain airline wont ship it. It is a big problem for a small guy like me. It is only for much later anyways.

Just don't ship the fluid. The customer will buy a can at his own place and fill the circuit like a pro !

[doubledragoncc]

Yes I can make a set with clip-on type bars but they must be 22mm bars.

I use Vortex clip-ons.. All the bars are 22mm. only the clamp changes size for different bikes/forks so im guessing most actual bars must be the same or similar size?

Yes, its only Harley that uses Inch bars really. But I have to state it to make sure lol.

It would add a lot of weight to the system though and shipping size too. But for those who want it I think they understand that.

I think it would look real cool too.

I am waiting for one of my old friends from the USA to ask for a set with Ape Hangers in inch for a Harley lol. Might make a set just for fun one day then use them in GTAV hehe

DD

[doubledragoncc]

Max seriously, that is not how you sell a product. If a customer has to do this and do that it is bollocks. Either I ship complete or I dont ship it. Besides, I will only use DOT5 as it wont strip off the paint or damage a carpet(has to be thought about) and not everyone can get DOT5. DOT3/4 would melt the seals.

My name is on this and anything, even if it is not my fault that makes a system not work will be very bad for me.

It is just one thing I will never do. Thanks for trying to help though.

DD

[HornetMaX]

Max seriously, that is not how you sell a product. If a customer has to do this and do that it is bollocks. Either I ship complete or I dont ship it.

Given it's going to be shipped most likely by air mail, I know I'd much prefer it to be empty, even if there was a way to ship it filled. You never know ... imagine it leaks while packaged ...

Filling a brake circuit is not rocket science: at worst one could bring the device to his bike garage and the mechanic will do it
Anyway, a customer that can understand and appreciate the difference between an hydraulic circuit and a classical spring one is probably smart enough to fill the circuit on his own (given proper instructions).

[BOBR6 84]

Yes I can make a set with clip-on type bars but they must be 22mm bars.

I use Vortex clip-ons.. All the bars are 22mm. only the clamp changes size for different bikes/forks so im guessing most actual bars must be the same or similar size?

It would add a lot of weight to the system though and shipping size too. But for those who want it I think they understand that.

Why would it add weight?

[doubledragoncc]

You have the weight of the top yolk and part of the fork tubes the clip-ons are mounted too as I meant if it was the real deal lol.

OR do you mean with just a set of bars like these:



which would NOT add more weight. They are a cool compromise. Know where I can get some CHEAP lol.

DD

[BOBR6 84]

Yeah man something like that.. Either way, making things adjustable would be cool for personal comfort with the system 

Im interested anyway DD 

[doubledragoncc]

I will look and see what I can get.

DD

[doubledragoncc]

Thanks Guimengo.

Known Darin for 6+ years lol. I have plenty of test videos with it on my YouTube channel.

https://www.youtube.com/c/IASystemsComputerControls

DD

[doubledragoncc]

 Hi guys, sorry for the delay in this update but I have been busy sorting out about hosting a dedicated server for GPBikes races for the GPBOC club. I am also starting a regular Live streaming of races and more.

So................ I finally got the foot controls together and have done a quick test of the new springs and the brake adjuster for Milestone games. Here are a few pics.









I am very happy how the adjuster hole in the rear brake cover allows to adjust the potentiometer to get the rear brake working without problems in MotoGP etc as is the clutch lever now.

Just finished the new wiring loom from the handlebars to the main frame too.

DD

[Meyer#12]

Looks very nice and professional! Can i come test it? P