server ping display

[finpower]

I have a question.
if I make a server, then displays it not with the ping.
just --- .
w 7 was not a problem.I think that I only are w 10 have the.
but the people come on the server.
perhaps who help me further.

greeting fin

[doubledragoncc]

Hi fin

Do you mean there is no ping amount showing just ---?

I dont think Win 10 would cause this but maybe your dedicated ini has an error. It is a very fussy ini file and it dont take much of a mistake to cause problems.

I use WIN 10 and have no problems with my servers.

Here is a copy of my dedicated ini if it may help you. It runs perfect on WIN 10 Pro 64bit

[connection]
name = GPBOC4 MotoGP v1.4 ;servername
maxclient = 16 ;max players.
password = ; ;lock server with password.
admin_password = ; ;adminpassword - enter on browser page, lower right corner.The votebutton will directly change to the selected mode, e.g. click on race or quali and the race or quali starts immediately without voting.
bandwidth = 2 ;0->low,1->medium,2->high
max_ping = ;
whitelist = ;G:\Lists\whitelistClub.txt ; the filename of the whitelist
blacklist = ; G:\Lists\blacklistClub.txt ; the filename of the blacklist
polls_disable = 1 ;set to 1 to disable polls
location = London UK ;information about the server location
MOTD = 

[export]
results = html; html or xml, If set it will automatically export results at the end of the race
directory = G:\Results\ ; the directory where results will be saved ( must exist )
units = 2 ;0->metric,1->US,2->UK

[replay]
save = 1 ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the race
directory = G:\Replays\ ; the directory where replays will be saved ( must exist )

[event]
name = Have at it boys!!!; ( optional )
track = A1 Ring v2.1_NDS ; trackname
track_layout = ;Empty->Default

category = Moto GP ;Moto GP/GP1000/GP800/SSP600/SBK/STK1000/S80 ;bike category allowed, Empty->Open, GP125, GP125 Cup, GP250, GP500, GP800, GP1000, SSP600, SBK, STK1000, Moto 2, Moto 3, Road

[rating]
class = ; A -> 2000+, B -> 1600-1999; C -> 1200-1599; D -> 800-1199

[weather]
realistic = 0 ; 0 or 1, if set to 1, following params are ignored
conditions = 0 ; 0 -> sunny, 1 -> cloudy, 2 -> rainy
temperature = 25 ; air temperature, celsius
wind_direction = 7 ; 0 -> n, 1 -> ne, 2 -> e, 3 -> se, 4 -> s, 5 -> sw, 6 -> w, 7 -> nw
wind_speed = 0 ; meters/second
track_conditions = 0 ; 0 -> dry, 1 -> wet

[hardcore]
force_cockpit = 0 ; 0 or 1
no_aids = 0 ; 0 or 1
limited_tyre_sets = 0 ; 0 or 1

[race]
quick_race = 0 ; 0 or 1, If set to 1, practice, warmup, sighting lap and warmup lap are skipped
practice_length = 5760 ; minutes
qualify_length = 25 ; minutes
warmup_length = 5 ; minutes
sighting_lap = 0 ; 0 or 1
warmup_lap = 0 ; 0 or 1
race_length = 100 ; % of full length
race_use_laps = 1 ; 0 or 1. If set to 1, race_laps is used instead of race_length
race_laps = 15 ; number of race laps
restart_delay = 3600 ; server restart time in seconds
pause = 0 ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"
pause_session = ; practice, qualify, warmup or race
pause_directory = ; G:\Resume\; the directory where data is saved. The default is "resume"
resume = ; G:\Resume\20160221-130139-A1 Ring v2.1_NDS_.ini; the file to load to resume an event
save = 0 ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignored
save_session = ;qualify  ; practice, qualify, warmup or race
save_directory = G:\Resume\; the directory where data is saved. The default is "resume"

[live]
enable =  ; 1 to enable live timing
port =; the UDP port
password = 


DD

[finpower]

thx DD for the quick response.
I now everything changed, but the problem still exists.
may bring a new installation of GPBike?
or there is a possibility where the error might be?

All cases many thanks

[doubledragoncc]

GPB can be real funny and if it gets a bug up its ass it is best to try an over install before doing a fresh install, BUT I have not tried the same with a server install. As it is YOUR GAMING GPB and not the server GPB that might be at fault try doing an over install of your GPB you ride in and not the server. If you still have a problem then do a fresh server install.

DD

[PeterV]

correct ports are open in the router?
I think they changed again for beta8, not 100% sure though.

[finpower]

the driver come even on the server.
therefore I do not believe that it is up to the ports.
i hope so 

[PeterV]

Look here maybe that is it Finpower

http://forum.piboso.com/index.php?topic=3637.0