throttle curve configuration

[sdecorme]

Hi,
I would like to know if it is possible in the moto file to change the throttle curve?

Thanks you

[sdecorme]

I've found some information here
http://forum.piboso.com/index.php?topic=787.msg8392#msg8392
but don't understand what it means
The throttle goes from 0 to 1.0
Question

rpm0 = 8000
         rpm1 = 10000
         rpm2 = 15000
         rpm3 = 17000
         throttle = 0.85

and the answer is

rpm0 and below = 1.0
rpm0 to rpm1 = interpolation
rpm1 to rpm2 = throttle
rpm2 to rpm3 = interpolation
rpm3 and above = 1.0

I would like to make the moto more sensitive in curve , to adjust the moto position with the gaz , and actually there is too much delay to make it really reactive.

Thanks

[matty0l215]

What bike are you trying to modify? And why exactly?

Are you trying to make it acceerate faster?

[sdecorme]

I would like to change the murasama 900.
Yes I want to make the throttle more reactive

[HornetMaX]

I'm note sure I understand what you're trying to achieve (and I suspect the throttle curve is not the solution) but if you put "throttle = 1.00" instead of "throttle = 0.85", then your throttle map is "neutral" (like in no throttle map at all).

[matty0l215]

But your controller input it the throttle? (assuming you are using a controller)

Unless there is something I'm not aware of, the throttle sensitivity can't be changed.

[HornetMaX]

Bikes can have a throttle map: it's a property of each bike, not something a user can set.