New Forum Software: https://forum.piboso.com/index.php?topic=6568
Started by Luponius, July 19, 2017, 05:31:01 PM
Quote from: Luponius on July 19, 2017, 06:35:54 PMOk I've set direct lean to 15% and this seems to work much better than with it off, this way the bike seems to want to recenter. I also added a 10% to 20% deadzone for most analog controls since my controller is a bit old and always leaves some form of input in there. It all seems much better, I'm still struggling with being gentler on the brake and throttle, I'm also finding it impossible to brake and downshift at the same time (left trigger is brake, left bumper button is downshift) any recommendations there?
Quote from: h106frp on July 23, 2017, 07:25:50 PMWith the demo you only have the default 125 - not an easy bike, if you are on Victoria and keep falling at the bottom of Lukey heights on this bike its not unusual. The rest of the track should not be too bad although Honda turn can be a bit 'iffy'. Most bikes do not like no throttle on a turn, try and get all your braking out of the way before the turn (front brake while turning will keep the bike upright - which you do not want) then you can use the throttle during the turn. Dragging the back brake a tiny bit can help tighten a turn and is OK while applying the throttle.