• Welcome to PiBoSo Official Forum. Please login or sign up.
 

CAWS MOD Team - Beta 12+ - Bike Release - 1992 GP500 Set - BETA

Started by Napalm Nick, September 21, 2017, 08:02:14 pm

Previous topic - Next topic

Napalm Nick


On behalf of the CAWS MOD TEAM -

1992 GP500 Set for Beta 12+


1992 Cagiva, 1992 Honda, 1992 Suzuki, 1992 Yamaha
Lawson/Barros, Doohan/Gardner, Schwantz/Chandler, Rainey/Kocinski

In the Official BikeMOD HERE NOW

Now Beta 12 holds the tyre files separately - Don't forget the TYRES (will also be in the BikeMod).

Please test them and provide any feedback here - all feedback is welcome and testing for Beta 12 is needed. Thank you.

USE 'SHIFT-HELP' IN SETTINGS FOR THESE BIKES IF NOT USING FULL MANUAL CLUTCH (no quick/semi/auto shifters here)

CURRENT KNOWN ISSUES - DIRT ON TYRES NOT SHOWING, LITTLE BUGS



Technical Info for your races:


Optimum front tyre pressure 2.10bar (30.5 psi)
Optimum rear tyre pressure 2.00bar (29psi)
Optimum Tyre temp Qual 65o       
Optimum Tyre temp Soft 70o
Optimum Tyre temp Hard 80o
Optimum Tyre temp Wet 65o

Although Tyre Warmers were used in the pits in 1992 they were rudimentary and capable of heating to the first 60o - Remember your out laps the tyre temperature will be low until heated fully by riding.

Check server Track and Air temperature to aid with pressure/heat setting.

1st New release change log 29 Sep 17:

First and foremost CAWS would like to thank MANU for allowing us to use (with permission) one of his sound samples for the Cagiva Mito. Thanks you MANU!  :)
Warlock has redeveloped the sound for the 500s here and we love it.

Others:

•CFG: VR params:
•Steer-angle from 25 to 28. 
•Steer-damper from 4 to 5.
•Reduced the front lateral chassis stiffness and damping in all bikes.

•Geom:   
•Changed the Tcam position . 
•Changed rear suspension geometry on Cagiva. 

•Engine: 
•Changed the torque 1 power curve (lowered torque at low RPM).

•Tyres: 
•Ky6 (Camber stiffness factor) from 1.8 to 2.8 on front tyres (reduced the woobles at low speed).
•Ky1 (Maximum value of stiffness Kfy/Fznom) from 20 to 17 on front tyres.
•Changed the heating factor and the wearing factor on rear tyres.
"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."

doubledragoncc

Will paints from beta11b work on the new bike set?

Great work guys thank you

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls<br /><br /><br /><br />i5 7600 5.0GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix GTX1060 OC 6GB DDR5 Kraken X62 AIO Cooler

Napalm Nick

Yes mate should be no problems I have checked a few and all seem OK
"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."

matty0l215

Wheels on some of the bikes wont work. The textures need to be sorted but this will come later.

doubledragoncc

GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls<br /><br /><br /><br />i5 7600 5.0GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix GTX1060 OC 6GB DDR5 Kraken X62 AIO Cooler

doubledragoncc

OMFG!!!!

SOOOOOOOOOOOOOOOO good to have the NSR back under me lol

Missed that smell n smoke baby

Hawky is a happy bunny too I bet

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls<br /><br /><br /><br />i5 7600 5.0GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix GTX1060 OC 6GB DDR5 Kraken X62 AIO Cooler

Napalm Nick

LOL haven't heard from him for a few days. There is a rumour of Castrol-R overdose  ::)
"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."

janaucarre

Hi,
Good job guys.
I tried the honda and It's a bit difficult to ride but not enough time to judge well.
I tried the yamaha at donnington and it is a really good bikes with good reaction.
One question : what is the best tyre pressure for each bikes ?

One thing i think it must be ameliored:
The qualif tyre, at donnington, could have a bit more longevity, because if tge first lap is made with high speed the second lap will destroy the tyre before the end of the lap.
Thank you very much.

Alone

Thank you janaucarre.
The optimal pressure is 2.10 on front, and 2.00 on rear tyre.
We'll take in count the wear of the qualy tyre for the next update.

Napalm Nick

Don't forget the test 'race' tonight - everyone welcome.

http://forum.piboso.com/index.php?topic=5189.0

Bike feedback on completion most welcome  :D
"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."

Napalm Nick

"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."

tchemi

Hey guys ! Nice work again !

Is it possible to move the 2nd inboard camera a litte bit backward ?? It is completly stuck to the windshield and makes it really difficult to ride. Can you rise it and pull it backward a bit ??

Kisses !

Napalm Nick

Thanks Tchemi. On the list.

Anyone got any more comments on the bikes from last nights race?
"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."

teeds

Quote from: Napalm Nick on September 25, 2017, 10:31:50 am
Anyone got any more comments on the bikes from last nights race?


Only that it was good fun, enjoyed the racing. I was going to suggest not running the warm up lap with the excessive DQs. Also think I figured out that if I'm turning to the left when I select gear just before lights out I get too much movement as the V/rider moves to do the gear resulting in a DQ. If I steer to the right the same movement doesn't happen (yet to test this when red lights come on) but might explain 1 reason for a DQ.

Think I missed a load of chat, so why did we switch to Magny Cours?

Napalm Nick

Hi Teeds yes it was fun but i felt bad for Wimp and others who didnt get away. :(

DONINGTON is a new large track that needs the LAA hack and as such it can take a long time to join. Even longer on a Dynamic version. When the game is more stable it will be fine to race on I'm sure. I think that was the reason for swapping.

Worth reminding others that selecting gear between the lights going out and back on for the start sequence is a known disqual bug for many years  ::)
"I can't give you a sure-fire formula for success, but I can give you a formula for failure: try to please everybody all the time."