• Welcome to PiBoSo Official Forum. Please login or sign up.
 
October 22, 2019, 09:15:47 pm

News:

World Racing Series beta14 available! :)


Project Realistic Rig

Started by speedfr, December 08, 2017, 02:10:31 pm

Previous topic - Next topic

doubledragoncc

I cut 50mm off each end so that the cables all line up to the MTEs.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 7700 4.8GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix RTX2070 OC 8GB DDR6 Kraken X62 AIO Cooler ROG Thor 850w PSU
https://paypal.me/IASystems

speedfr

Ok, here a few picts of my new Iron ( ;D) after welding and mounting the MTE for a try.
Then some side picts to appreciate the way the cables route.

Welding the steering head today, but might not have enough Oxygene to finish.  :P













Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

Napalm Nick

"The post you are writing has been written at least ten times already in the last 15ish years. Its already been reported, suggested, discussed, ignored or archived (but mostly ignored). Why are you doing it again?"

speedfr

Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

KG_03

Wow it looks amazing. Im really curious how it will work.

doubledragoncc

Great work speedy. Just remember the top MTE is for throttle. You should have a good clean S shape to the outer cable.

I use grub screws not bolts as it looks cleaner byw

Look forward to your tests

DD



GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 7700 4.8GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix RTX2070 OC 8GB DDR6 Kraken X62 AIO Cooler ROG Thor 850w PSU
https://paypal.me/IASystems

speedfr

Thanks guys  :-[

Yes i've seen that the top MTE has a harder spring.  ;)

And i should pick the handlebar on thursday when they receive my brakes pads for the Pan European.
And i ordered the rear brake and speed selector stuff from the German guys, should be there on thursday too.

I tried the Leo Bodnar, works fine and i even dl the little exe "BU0836 configuration".
Things are going fine but too slow obviously.

My goal is to have everything ready before the first race of WSBK.  8)
Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

doubledragoncc

Did I flash the board for you? It should say Hs3 Streetfighter PRO in windows configuration?

If not I will send you the file to flash it with the latest firmware too.

The configuration tool is not used for this board by the way, only the HID Flash tool

Let me know

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 7700 4.8GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix RTX2070 OC 8GB DDR6 Kraken X62 AIO Cooler ROG Thor 850w PSU
https://paypal.me/IASystems

speedfr

It says "Game Controller HID" under Device Manager and "BU0836 Interface" under the Joystick/Printers config panel.

So, it's not flashed i guess but do i need it ? Tell me.
Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

doubledragoncc

Leo Bodnar made firmware for me so I like to use it as is latest and works best I will email you when I get back from my meeting this morning.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 7700 4.8GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix RTX2070 OC 8GB DDR6 Kraken X62 AIO Cooler ROG Thor 850w PSU
https://paypal.me/IASystems

speedfr

Oki doki Allan, i'll be looking for that stuff.

(tried to catch you on Skype yesterday, i'll retry tonoght but late, i've a big client to finish tonight so...probably 'round 10 PM so 9 PM your time... If you can...  ;D )
Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

speedfr

Little update with the new handlebar and the mad comodo on the left.

Now heading to the cables system to finish and then two more steps, the support attached to the table in front of my screen and second is the feet stuff, the rearset (who should arrive tomorrow).

Last thing will be about cabling and electronics part.

@DD : i haven't flash anything yet, i'll do it, just need to sneak into Leo Bodnar to learn how not to make a mistake and brick my BU0836.







Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

doubledragoncc

February 22, 2018, 09:23:16 pm #42 Last Edit: February 22, 2018, 09:26:43 pm by doubledragoncc
flashing the BU is real easy just make sure you remember where the file is in the folder I sent you

I can walk you through it if you want

DD

Edit: I alway remove the lock on the RED button so it is momentary and not push on push off. PLus put the clutch AFTER the button units so they are closer to the grip or you will have to stretch to reach them when riding.

GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 7700 4.8GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix RTX2070 OC 8GB DDR6 Kraken X62 AIO Cooler ROG Thor 850w PSU
https://paypal.me/IASystems

speedfr

Ok for the flashing, i'll do that and concentrate on it when time will come.

About the button before the clutch, smart idea, i found that a little bit away but that should solve that sensatons. Anyway, nothing is definitif on this side so far, only once i have the steering head attached to the desk, then i'll know whare to put my hands and finger, then i'll fix everything.

And the lock about the red button is done already, i opened it yesterday night.  ;)

Missing Gp500 (Microprose)  Testing EDTracker Pro on YT   i7-4790K/16Go/GTX1080/1440p/Full WC

doubledragoncc

If you find the red buttons are very easy to touch you should lengthen the spring in them a few mm it makes them better

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 7700 4.8GHz z270 ASUS Maximus Code Mobo 16GB 3866MHz DDR4 RAM ASUS Strix RTX2070 OC 8GB DDR6 Kraken X62 AIO Cooler ROG Thor 850w PSU
https://paypal.me/IASystems