• Welcome to PiBoSo Official Forum. Please login or sign up.
 
August 27, 2025, 04:03:16 AM

News:

World Racing Series beta14 available! :)


IASystems Hs2 StreetFighter system

Started by doubledragoncc, March 15, 2016, 09:55:06 PM

Previous topic - Next topic

doubledragoncc

Hi grimm, yeah I do explain why I wont do something out of respect for someone who has taken the time to offer an idea. Some are things I personally want too, but cost is the issue.

As the systems are only built to order, you can ask to have what you want lol. I will even make a pink one if you want (grT) and add silly fringes from the grips if it floats ya boat lol.

I also feel guilty if someone takes so much time to think, look and leave a link for an idea that the least I can do is give a thank you and a reason as to me not using the idea.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

Manu

Amazing work mate!!

Very very beautiful!
It's Easier to Fool People Than It Is to Convince Them That They Have Been Fooled.

doubledragoncc

 Hi guys,

Here is todays update.

After forgetting my 3D printer only prints so big I had to redesign the MTE cover. Not sure how it will turn out but I can but try lol. Decided to clean up the printer first as the hairspray I use for it makes a bloody mess lol.

Here is a pic of the design on the 3D splicing table to create the file to print her up.



Well it will be a long print and I need some sleep for once so it has to wait until the morning.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

Hawk

Looking good mate!  ;) 8)

As the printing takes a long time and you need some sleep, why not set it printing and go and have your sleep? That way it will be complete by the time you wake up.  It'll save you time, no? ;D

Hawk.

doubledragoncc

April 26, 2016, 11:01:24 AM #124 Last Edit: April 26, 2016, 11:55:13 AM by doubledragoncc
DUDE!!!!...............................I wish

That is something many forget with 3D printing. You have to check all the time as so many factors can screw it up. It took 10 goes to get this to start properly because it is so big and where my printer was damaged by the fucking roofing worker and never got comp for it just asaulted I have problems with big prints.

Before someone suggests get a company to do it, in UK the 3D printing prices are high. For ONE of my MTE units the cheapest some company will print them at for a multiple order is £38!!! That would cost 30 quid plus more than it costs me to make the WHOLE MTE!!!

11th try is printing now and fingers crossed lol

DD

EDIT: Oh and it is only 4 ft from my bed and do you know how loud these things are lol. Drives me crazy!!!

EDIT: FUUUUUUUUUUUUUUUUUUUUUUCK!!!................................

No 11 failed so back to the 3D drawing board. I will try to make it in parts which I did not want but have no choice it is just TOO big lol.
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

Hawk

Quote from: doubledragoncc on April 26, 2016, 11:01:24 AM
DUDE!!!!...............................I wish

That is something many forget with 3D printing. You have to check all the time as so many factors can screw it up. It took 10 goes to get this to start properly because it is so big and where my printer was damaged by the fucking roofing worker and never got comp for it just asaulted I have problems with big prints.

Before someone suggests get a company to do it, in UK the 3D printing prices are high. For ONE of my MTE units the cheapest some company will print them at for a multiple order is £38!!! That would cost 30 quid plus more than it costs me to make the WHOLE MTE!!!

11th try is printing now and fingers crossed lol

DD

EDIT: Oh and it is only 4 ft from my bed and do you know how loud these things are lol. Drives me crazy!!!

EDIT: FUUUUUUUUUUUUUUUUUUUUUUCK!!!................................

No 11 failed so back to the 3D drawing board. I will try to make it in parts which I did not want but have no choice it is just TOO big lol.

Sorry mate.... I didn't realise that you had to keep your eye on the process while it was printing; it certainly doesn't sound as straight forward as a normal sheet paper printer where you can set it to print a batch of pages out and then go off and have a beer or something while it finishes.  :-\

You'll sort it I'm sure!  ;D 8)

Hawk.

doubledragoncc

BASTARD!!!! that feels better

SO............................................ I did this.



That piece is printing right now and so far so good, fingers, eyes, legs and me nuptials all crossed. IF it works out the next piece is bigger so will cross everything harder......OUCH



Wish me luck lol.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

doubledragoncc

 NOT my day........................

Just 15 mins after I had last checked it this happened!!! As it is in a covered printer I did not notice it, which dont matter in a way, its screwed!!!!



This is how it can be the day after you clean a 3D printer and level the bed. it takes a while to get her working right. I will have no hair by the end of the day. I may even just do it another way lol. This is print 13 after all!!!

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

Napalm Nick

No worries because you have printed some spare hair there!

Bad luck DD  :( keep fighting!  :)
"The post you are writing has been written at least ten times already in the last 15ish years. Its already been reported, suggested, discussed, ignored or archived (but mostly ignored). Why are you doing it again?"

Blackheart


doubledragoncc

YES!!!......................................

AND 13 warped as well. It is just one of those days. I will take a break before the Hammer Of Wrath doth cometh!!!

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

Blackheart

Take a little break and rest is essential! Also for the the printer maybe  :-X

BOBR6 84

just pay the 30 quid DD  ;D looks like a nightmare..

doubledragoncc

Yeah I pay 30 quid and something dont fit, that's the whole point of printing the parts first no matter what and I am not gonna wait 2 weeks min to get a part that dont work lol.

It might be the parameters I set for the print. I will get it done after a break. As I said first day after bed leveling is a bitch lol.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.

doubledragoncc

 OK.............................

Today's update is a bit better, not perfect but better. So I finally got the top cover printed, DD 1 3D printer 15!!!  As I said, it is always a pain after resetting the printer. In the morning I will make another one and the lower too, new designs lol.











I find it really cleans up the system. Top took 3.41hours to print and lower will be more, thats an extra 8 hours on the 40plus hours printing time already!!! I think it is worth it though.

I also got my new rear brake springs and other hardware in. The new springs are 1500Nm strong compared to the 1000 and 2000 springs I tested. This is so much better for feel and prolonged use.
Black spring is the new one.



Well I have a 125RR Cup race on Norisring to practice and qualify in and will leave the rest until morning.

DD
GPBOC Live Streams: https://www.youtube.com/c/IASystemsComputerControls; i7 12700K 5.1GHz Z690 ASUS Strix Z690-A Mobo 32GB 3600MHz DDR4 RAM ASUS Strix RTX3080 OC 10GB DDR6X ASUS Ryujin 360 AOI Cooler ROG Thor 1200w PSU in ROG Helios Tower Case.